Search results

  1. J

    2015 Golf TDI prices paid

    This is exactly what I want down to the color. Is this out the door price?
  2. J

    Light bar i made.

    Looks good!!! I like it! Yeah i will and if you figure out something before me on the wiring let me know.
  3. J

    Light bar i made.

    Can you post a picture? I still have not wired up the lights yet. will be my first time doing this so i need to do a search on wiring these up. I would like to have a set up with a toggle switch inside the car. Anyone have a good link i can check out?
  4. J

    Light bar i made.

    Thanks! Its a law in texas to have a front licence plate and it not be blocked by anything.
  5. J

    Light bar i made.

    Heres a picture of a light bar i made. I made this light bar to bolt on top of the panzer skidplate. Its bolted twice on each side threw the bar and skidplate. Had to use a hole saw on the lower bumper lip to run the pipe threw. Used a pipe bender to bend the pipe in to the shape i wanted. Then...
  6. J

    Gauging interest on light bars for MKIV platform. Please give me feedback!

    I like this bar design but with two lights hanging from the bar. Good luck with your final!
  7. J

    DIY: 2" Lift Kit for Under $40 - EASY!

    The stock struts are 7/8 inch where the spacer slides on so a 1 inch pipe will be loose. That one of the reason I have gone that route. I'm not say it won't work I'm just concerned about it being safe.
  8. J

    Any interest in a 1.5" lift?

    The stock struts are 7/8 inch where the spacer slides on so a 1 inch pipe will be loose. That one of the reason I have gone that route. I'm not say it won't work I'm just concerned about it being safe.
  9. J

    Beef on a Budget. VR6/Wagon springs

    I have the same set up right now. There 10mm spacers. With two stacked it gives you 20mm (0.78 inch) lift. I'm looking to get 1.5 inch lift. I thought about stacking 4 to get a 1.57 inch lift but hear some people say not to stack more than 2.
  10. J

    Any interest in a 1.5" lift?

    Also it can be any length not just 1.5 inches.
  11. J

    Any interest in a 1.5" lift?

    I've been trying to find the best way to do a 1.5 lift under $100. Looking through all the ways to do a lift. I've came with $40 moog wagen springs in the rear (i have them installed now and got a 1.25 lift) and having a local machine shop make 1.5 inch spacers for the front. This will level out...
  12. J

    DIY: 2" Lift Kit for Under $40 - EASY!

    I've been trying to find the best way to do a 1.5 lift under $100. Looking through all the ways to do a lift. I've came with $40 moog wagen springs in the rear (i have them installed now and got a 1.25 lift) and having a local machine shop make 1.5 inch spacers for the front. This will level out...
  13. J

    Beef on a Budget. VR6/Wagon springs

    I've been trying to find the best way to do a 1.5 lift under $100. Looking through all the ways to do a lift. I've came with $40 moog wagen springs in the rear (i have them installed now and got a 1.25 lift) and having a local machine shop make 1.5 inch spacers for the front. This will level out...
  14. J

    Volkswagen TDI ALH Vacuum Diagrams (Stock & Modified)

    If I have a Malone tune with egr delete can I remove the N18 without a fault code?
  15. J

    Volkswagen TDI ALH Vacuum Diagrams (Stock & Modified)

    Thanks for the reply but that does not answer my question. I want to know if i can remove the N18 valve from the car with the EGR delete? I'm asking because i don't see the N18 in the EGR delete diagram but i do see it in the stock diagram. Jason
  16. J

    Volkswagen TDI ALH Vacuum Diagrams (Stock & Modified)

    I'm going to be doing the ERG delete and keeping the ASV. On the erg delete diagram the N18 is not there. Can i just remove the N18 completely from the car when using the ERG diagram for the delete? Jason
  17. J

    wtb stock mk4 golf grille

    found one thanks
Top