Thanks for the advice everyone.
I never noticed the crack in the piston until I was working with the image to post it here. It was a holy sh1t moment for me $$$ climbing.
The engine is already out of the car. I decided that would be the easiest way to also deal with cleaning the intake...
I had the misfortune of needing to remove the head due to some missing timing belt teeth.
Hoping the experts here can help me diagnose this injector problem I discovered. I think the second cylinder (burned brown in image) has been over fueling, it has the thickest soot in the exhaust port and a...
I have a cruse problem similar to TDIJetta99. Its on a 2004 golf PD every thing works normal except after a random amount of time it will loose up to 10 km/h. Adding fuel manually with the foot brings it back to setpoint and the cruse takes over again without moving any buttons. Any ideas of...
The March issue of EAA's Sport Aviation shows a Finnish built aircraft powered by VW 1.9 TDI-JH1. Googling JH1 does not find any thing related to VW but the picture in the magazine looks like a PD engine. The highlight of the article is the miserly fuel burn - the 63 gallon wing tanks give it a...
Mine vibrates at idle, its kind of a shock after the silky quiet smooth quality ride when in motion. The alternator pulley, front engine mounts bsm and cam are all new. When I replaced the CV boot I saw a four ring sticker on the axle hopefully the Chinese are not cloning stickers as well.
I...
Mine has a leak in the same spot. VW vortex has a fix it article. Since mine has high km I decided to top it up once a month until something else breaks in the area. This site already has good tips on how to fill it, do a search.
Diagnosing the leak cost me a power steering hose. The fluid is...
Idlers and smokers have about the same mentality. You can show a smoker pictures of rotten lungs, gum rot throat cancer and they continue to smoke. Show an idler pictures of tapered cylinder walls and thick carbon on the backs of valves and they will continue to idle. When the semis used to idle...
It has been working very nicely for a year since I did the chainectomy and some unexpected stuff like engine mounts and camshaft. So I quickly forgot how over priced the parts seemed to be at the time.
So now that you tofed the engine with a grease car kit just how much money did it save you? Three maf's in 30k you must be running a K&N filter. Someone should come up with a good acronym for them like Karnage & Negligence. My BHW runs like a fine piece of German engineering at 355k so I am not...
Stop idling, that is bad for the engine your wallet and the environment.
There is a good thread some were on blocking air through the rad.
Remember to stuff a plastic bag over the inter cooler that adds as much heat blocking the rad. The coolant glow plugs only work if the a/c is turned on. I...
Four tanks after fixing the torsion adjustment I see no difference in the mileage trend.
Most tanks come in at 6.6 l/100km as usual.
For the minority of the world that use unique USG's that translates to 39.9usmpg.
Helped my son replace the timing belt on his Cadillac Catera today.
The Car was supposedly only Caddy dealer serviced before he bought it.
Who ever did the first belt was too lazy to remove the water pump pulley so they used a knife to massacre the timing belt cover. Now all kinds of crap can...
I changed my BHW to 0.0 today from -2.9. It sounded better once out of the negative numbers. I will report the economy after three tanks, each tank seems to come in a little different. It was nerve wracking messing with the timing freehand after having it all pinned with special tools. It took...
A big thank you to all the volunteers that made the event so good. I arrived home Tuesday night.
Really loving the RC tune, feels like a zippy car now.
Mine dripped on the ground from the lower inter cooler connection. It was under warranty and the stealer replaced the seal in the hose coupling. If I had not had experience with a Peugeot and Mercedes having oil wet pipes after the turbo I would have been more concerned about it. A small amount...
I chose panzer for the excellent mounting system and the engine is all sealed up from underneath. Some other plates let snow in. The road salt is making mine corrode around the mounting washers. I need to invent some kind of dielectric isolation to stop the plate from been the sacrificial anode...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.