Search results

  1. Almost1

    cruise control onto turn signal swap?

    Yes it is all one unit. I'll send pics after work today
  2. Almost1

    cruise control onto turn signal swap?

    That's a wiper stalk
  3. Almost1

    cruise control onto turn signal swap?

    I am parting out a B4 w/cruise. I assume this is for a B4 since your profile mentions one. Works perfectly
  4. Almost1

    1997 Passat Headlight Upgrade

    E-codes and relayed headlight harness. Have both for sale: https://www.vwvortex.com/threads/b4-passat-part-out-northern-md.9548563/
  5. Almost1

    B4 Passat Sedan Part-Out

    It is in good shape. There are a few minor blemishes in the leather, but overall very good for it's age. I'll send pics when I get home
  6. Almost1

    B4 Passat Sedan Part-Out

    It has a BFI GS2 grey Alcantara knob on it now. I don't have the original as it was beat up when I got the car.
  7. Almost1

    B4 Passat Sedan Part-Out

    Cluster is not for sale
  8. Almost1

    FS: BNIB Nissens Radiator for B4 Passat TDI - Northern, MD

    I have this leftover from my TDI I rolled before I got a chance to install. OE PN: 3A0121253AB for models with air conditioning. Paid $125 from Rock Auto Looking for $100 OBO I'd prefer not to ship as I got rid of the extra packaging to protect it during transport
  9. Almost1

    B4 Passat Sedan Part-Out

    The trim for light/sunroof control started to crumble, and I had to glue angle brackets to give me mounting points. Are you interested in the light/sunroof control assembly as well? I can take pics if still interested. Trim around sunroof is good. Is a Sedan, so no parcel shelf
  10. Almost1

    B4 Passat Sedan Part-Out

    It's a VR chassis, but there are plenty of good parts in it. Please let me know what you're after. Cluster and brake booster bracket are not for sale Pics are hosted on VWVortex: https://www.vwvortex.com/threads/b4-passat-part-out-northern-md.9548563/
  11. Almost1

    Steering gets more aggressive after turning the wheel slightly

    ^^Good suggestions It feels like what you would expect bad bushings to cause, but there is no noticeable clunk or noises of any kind when it 'shifts'. The easiest thing to do would be to to replace the bushings, and I do have a poly set on the way. I hope it doesn't come down to a new rack $$$
  12. Almost1

    Steering gets more aggressive after turning the wheel slightly

    Tires were new about 2 weeks before the suspension components. I always inflate to what the sticker says All suspension bushings have been replaced. I got the alignment done at a general tire shop originally, then verified at NGP, a VW/Audi specific shop. No adjustments were made
  13. Almost1

    Steering gets more aggressive after turning the wheel slightly

    Hey all, For a while now, my steering has this quirk where the "sensitivity" changes depending on the steering angle. For example, I'm cruising on the highway at ~60 and need to take a slight bend. The initial movement feels great, but once I hit a certain point (say 5 degrees of turning the...
  14. Almost1

    I'm taking the PLUNGE!! bought Kerma tune, k03/K04 turbo and DLC injectors... what else??

    I just sold my Techtonics downpipe 3 days ago! It's a direct fit for the B4 TDI, and made very well. It is tricky to install because one of the nuts is near impossible to get to with the support they welded across the back. Still worth the money in my opinion.
  15. Almost1

    '96 B4 Sedan in Arizona Junkyard, anyone need parts?

    I have a set of good e-code lenses (replacing due to broken plastic on the passenger side, driver's side only has condensation). I bought another set to replace, so they were going to end up in the trash anyway. TYC brand though... Edit: My VR sedan has the tunnel cover. Didn't know they were...
  16. Almost1

    WTB: B4 Passenger Fender

    You can have it! I, too, was thinking about just cutting and fitting gappy into the area I need (around the corner marker), but thought the metal was too thin and I've never welded sheet metal before. I just tried car-part and found one about 45 mins from me. Will be picking it up on Monday
  17. Almost1

    WTB: B4 Passenger Fender

    Thanks for the lead! Yeah when gappy was bolted down there was 3/4" (and I'm not exaggerating) of gap between the fender and door. Plus it's so thin it might as well be made of tin foil.
  18. Almost1

    WTB: B4 Passenger Fender

    Well, the brand new aftermarket fender I bought doesn't fit. Crazy panel gaps! Looking to buy one as close to northern MD as possible. Any color, but black preferred.
Top