Search results

  1. N

    show me your diy GP harness

    yeah one wire is still dead, anyone know what the relay looks like or where the under dash wiring feeds those two wires?
  2. N

    Some MK4 interior parts and engine parts NY

    just the bottom piece, thanks
  3. N

    show me your diy GP harness

    Awesome thank you for the response, where is the glow plug module located? I found a box with two relay's but I unplugged them and it had no effect on the voltage at the glow plugs. Thanks!
  4. N

    Some MK4 interior parts and engine parts NY

    Looking for a red grill and bumper cover, headlights and a black leather back seat. Would you have any of those? Thanks Scott
  5. N

    show me your diy GP harness

    With the factory harness plugged in below, should we be seeing 12volts from each red wire?
  6. N

    2 wire glow plug harness voltages

    I believe on the 99.5-01 cars the start of the GP harness is this pic below: Full size pic-https://imageshack.com/i/f7y5npj I'm trying to solve a cel for voltage mismatch. I tested both wires before they go to the glow plugs and found one to be dead. Now I'm at the harness in the pic above...
  7. N

    GP Harness leads voltage

    I have half of my glow plug harness not getting any voltage, I tested the the 2 wires that lead into the harness and one gets 12v and the other nothing. Are they both supposed to be 12volts? I read 5 pages of the GP v2 thread and couldn't find it.
  8. N

    4.2L V8 TDI Cadillac LMP and 2.0L CR TDI SL-C

    Whitbread what did you do to get a job there? I know you did a lot of fab work on your own and I'd like to get into the same thing. I can't weld tho :(
  9. N

    WTB 99.5 Air Compressor Sanden SD7V16

    I just had to go through this, go to a junkyard and get one for $100-$150 vs. new is like $400+ just my opinion...
  10. N

    WTB: Jetta or Golf rolling TDI shell or blown motor/trans

    looking for a 2000-2004 Jetta or Golf that either has no motor or trans or a blown engine or trans. I can search on here, just if anyone sees something on there local craigslist or something please PM me or post here. Thank you fellow TDIclubbers :D
  11. N

    Feeler - 2003 GL with significant upgrades

    how do you like the swaybar setup? Just curious because I'm thinking about getting a 25mm front bar and a 28mm rear bar, nice car overall, any ideas on price?
  12. N

    2001 Jetta TDI selling as is with broken alxe or U Joint on drive side.

    I Also PM'd you yesterday with no response, if someone hear's back from him can you post here so we can stop hounding him.
  13. N

    fs: NewSouth Performance 0-35psi boost gauge, egt gauge, dual gauge pod

    Curious, why are you selling? You upgrading to something else?
  14. N

    Anyone Import a BMW Diesel?

    Not a bad idea actually.... Is the E34 a 5-speed? post some pics!
  15. N

    Anyone Import a BMW Diesel?

    so it looks like I'm waiting a few years to import a 2000 E46 diesel clip :(
  16. N

    TDIs in Rochester, NY Area

    Tis I!
  17. N

    Anyone Import a BMW Diesel?

    Oh reeeeeeeeeealy? Were they imported to Canada new? Linky? I also found out that Lexus (toyota really) made a 2.2 turbodiesel in the IS series sedan, I'm sure importing a 2005+ half cut one of those wouldn't be cheap, but it would cover the 6 speed manual trans and diff ratio's and maybe...
  18. N

    TDIs in Rochester, NY Area

    I would be very very grateful for timing help, as my car is hard to start in the cold and puffs oil smoke at start-up cold. It could be the pump dying but I want to believe it's more of a timing not set correctly issue as it's only got 198k on it. Is there a way to brew biofuel with a higher...
  19. N

    Anyone Import a BMW Diesel?

    Yeah I just PM'd him about getting a 1/2 cut, it seems way easier to get a japanese engine than one from Germany for some reason. I just want a RWD diesel car dang it! Too bad toyota didn't make one....
  20. N

    Anyone Import a BMW Diesel?

    Just wondering if anyone has imported a non-VW diesel engine for a swap and gotten it past customs etc. Not looking to do it myself but pay a importer.
Top