@Kramer : old one was dead. Looked fine, but old. No workey. New one works fine.
@braddies : had this experience with my Dodge pickups. common in the TDis?
Hey Team,
Have a 2005 BEW with a weird issue. Was driving down the road and it quit. Troubleshooting revealed a dead lift pump which I replaced. It's working fine. I pulled the line ahead of the injection pump and ran fuel through, reconnected it, but no start. When cranking, it sounds like it's...
No real rust. I remember seeing a surface spot....somewhere low. But the pictures while not flattering are accurate. I think this car lived in eastern WA or OR for much of it's life, so no rust isn't surprising, and it's even drier where I am than east of the Cascades.
Hi, thanks for looking.
1996 TDi Passat Wagon. This is our family's third Passat TDI of this generation; we know the cars pretty well.
As most of you know, the car gets 45ish mpg with an 18 gallon tank which takes you 700+ miles on a fill.
The car stops, goes, turns, runs, goes down the road...
good questions. Do the bulb holder assys ground direct, or through the loom? If the loom, where do they land? (first one of these....I can find them on B4s all day.....)
thanks
Hey team, we recently bought an 05 jetta wagon tdi. It's our fourth tdi, with two B4s in our past and a B4V in the garage. The tail lights were behaving oddly, so my son and I went through the receptacles cleaning and sorting. Everything works EXCEPT.....the two-filament tail/brake bulbs. When...
Yeah lucky. car-parts showed about 12 joints in the US with the right glass on hand. 7 answered but wouldn't ship. 4 wouldnt answer the phone or call back. I got lucky and found the right guy. Man....that glazing was hard to find.
Shout out to Jack's parts in MA. Willing to pull, package and ship me some B4V glass.
http://www.usejack.com/index.php
Hes got a few more pieces. as info.
Over the weekend vandals shot two panes out of my 1996 B4V. They did about 40 cars in our neighborhood. I need Left passenger door window and left cargo area window please.
ok I give up. What's the procedure for changing the ignition cylinder? anyone have a guide? I can't find it in my Bentley books.
Going to just do the whole g-d car with new locks and keys.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.