Search results

$4000

Needs to go before July 13th

Accepting offers, let's sell this thing.

bumping this to the top

New turbo has been installed, after the installation I found a compression leak at the base of the #4 cylinder. I pulled the injector, cleaned it up and installed a new copper seal. Everything is working well now, I took the car on a little drive, but am trying to avoid any high boost to allow...

No EGT gauge, but the BV43 does have a convenient port to install one.

Craigslist link has been updated.

Car has been sold

Think you're on to something. My intermittent code kept coming up instantly until I shook the harness and reset the code. I need to untape the harness going under battery and go through it.

Any specific place I should focus my attention? Thanks!

01268 17-10 01268 27-00 Those are the VCDS codes. I also have a pretty harsh stumble/ black smoke when accelerating hard from a low speed in 1st or 2nd gear.

http://newlondon.craigslist.org/cto/4625946543.html $2850

Not mine, but I think it is the most unique tdi swap I've ever seen http://newlondon.craigslist.org/cto/4621140482.html This is a one of a kind project car. It has been my daily driver for the past 3 years and has treated me well but its time to move on. It runs and drives well but needs...

All set for winter now:

I bought the full harness from someone, but thanks anyway. I just used flat black upholstery dye from the auto parts store, worked well.

I can't fit the 14's, my calipers just barely clear my BBS 15's. It took some investigation to find some affordable 15's to run in the winter and the Saturn wheels turned out perfect. Do you run studs on your tires? I'm debating whether I should stud them or not. I ran on the 225/50/15's last...

Just picked up a set of Saturn SL steel 15x6 wheels for $100 and ordered a set of these 185/60/15 snows for the winter

I'm interested if sale falls through.

I'll take the cover, PM me a paypal address. If you find another pump I'll take that too :)

I posted this on my build thread in the A3 B4 section, but I think I’ll get more responses here. I drove down to waterfest from CT this past weekend after working through some issues. Prior to leaving, I installed new engine mounts, reassembled and tig welded the case pressure relief valve, and...