Search results

Stripped a bunch of parts from my landlord's BEW MkIV wagon. Located in Amherst, MA. Most parts are available for delivery for the extra shipping cost. I've got more to list, so if you don't see something, ask. Headlights with fog lights. Lenses a bit hazy, but no cracks or crazing. Might be...

Where in CT? I stripped a bunch of stuff off of my landlord’s wagon before sending it off to the scrap yard, so I’ve got some of the parts you’ll need. Bumper, grille, and fender (I’ll have to check which side I have) are blue though. Got the core support and structural portion of the bumper...

Is someone making a valve cover gasket for these now? The OE valve covers have a molded, non-replaceable gasket. Last I checked there wasn’t an aftermarket one available. The fix for a leaky gasket has always been to replace the valve cover with a new one or known good used one and hope the...

Going to be getting the Jetta back on the road soon. I was having overboost issues before I lost 5th gear and parked the car for winter. I am debating my options for dealing with the turbo while I address a bunch of big maintenance items and replace the transmission. I have a 2.5” turbo back...

He’ll have to pay sales tax anyway. Shipping them is “free”, but picking them up gets a $40 or $60 discount (I forget the exact value). He has CT as his location, so he may be close enough to the distribution center in East Windsor.

Did you get this resolved? I have a project at work that uses this connector, I remember finding a cross reference for a TDI. I can pull up the part numbers on Monday if you need me to. Finding US sources wasn’t easy (this is on a Chinese spec Cummins industrial 4 cylinder engine). I might...

You can go pick them up from Tire Rack and save some money if you are anywhere near Bradley. I did really well with Continental Pure Contact. Actual all season tires. They held up well mileage wise, handled well in the rain and snow, pushed them a bit on windy backroads with no issues, fairly...

Check your local laws as well. A lot of states have regulations regarding operating vehicles without doors or foors. If it wasn’t designed that way from the factory, it isn’t allowed. Safety concerns for all the reasons stated above. Half doors or tube doors would be interesting. You are still...

Interested in the hard lines from the injection pump to the injectors if they are available.

I can pull one off a 2005 if you are still looking for one. Car will be gone on Monday or Tuesday though.

Tearing the engine down to reseal and do a timing belt with all the goodies on my ALH. Looking to buy, borrow, or rent the tools that are necessary. If you are getting out of VW’s and need to offload the VW specific tools, I’m interested in most things for the MkIV and MkVI.

I’ll have to check the condition later today when I get home, but I know I have one from my landlord’s Jetta wagon that I am prting out. I do not recall if that is the one off their Golf that smacked an island in the road and got flattened out a little bit, or if it was the one from the wagon...

Someone was already requesting the rear hatch. It is up to them if the light goes with the hatch.

Sorry for not being responsive the past week. Nothing going on during the week for months, start a time sensitive project and everything falls apart around me. Started getting back to the car lastnight. Getting back to PMs now. Just about have everything ripped out of the engine bay at this...

Where in CT are you? I work in Windsor, but live in MA, up 91. I could possibly meet up to take it off your hands.

Louie - It has the factory rails and they are available. Not sure if you are looking for the aftermarket bike mount type stuff, but my landlord has those from his Golf. I don’t know if he is planning on using those on his current car, but I can ask about that if you want too. oldpoopie - no...

jokila - I likely won’t be able to get to pulling that until early next week. I only have this evening and tomorrow to work on it. Getting the engine and transmission out is the current priority. I’ll let you know when I pull it. swapmeat - replied to PM. Fenders were a bit more rough than I...

Sorry for the delay in responses. I’ve had some family issues that have been taking up my time. Getting back to the car and responding to people here.

I’ll try to pull the fenders tomorrow to see how everything looks under the liners.

Replied.