Search results

Guys, I need help again. After replacing the cluster, the fuel gauge is not reading correctly. I discovered that the 2013 Polo (where I got the new cluster from) has a 50 liter fuel tank, while my 2007 Polo has a 45. Do you know which Eeprom address refers to this information and what the...

Now GetSKC worked perfectly. Next time I won't need to open the cluster and write the eeprom again. Thanks! cluster_mem_$03C000.bin

I tried GetSkc but it timed out : Version 0.99.0-beta (https://github.com/gmenounos/kw1281test/releases) Args: COM4 10400 17 GetSKC OSVersion: Microsoft Windows NT 10.0.22621.0 .NET Version: 8.0.6 Culture: pt-BR Opening serial port COM4 Sending wakeup message Reading sync byte Keyword Lsb $01...

It worked!!!!! You are the best! I've been trying to get this cluster to work for almost 2 months. Thank you very much! Could you explain to me how you made this patch?

This time the process was completed without errors. Is it possible to encrypt using your decryption program? cluster_mem_$02CE39.bin

At the end of the program execution, it presented "expected error": (I executed the command 3 times, and each time the reading stopped in a different block) Version 0.98.0-beta (https://github.com/gmenounos/kw1281test/releases) Args: COM3 10400 17 DumpMem 0x28000 0x8000 OSVersion: Microsoft...

I redid the cluster and ecu combination and configured the keys. I tried to read the address "0x13A" (Odometer) and the program was unable to read it. The address "0x65" (SpeedSensor) was even able to read, but it is not writing a new value. Version 0.98.0-beta...

I have already done the procedure you mentioned, the new cluster is working. The only problem is that it's not keeping up with speed. It is not possible to change the speed sensor address (0x065) with the EEPROM encrypted, only in the decrypted file. But the cluster does not accept writing the...

Apparently this location is 0x65, changing from 87 to 86. I made this change and the odometer with the original km, but when recording, the panel was completely disconfigured. I also tried to save the decrypted file without the changes but the same problem occurs. How do I encrypt this...

SKC worked perfectly, thank you very much! Congratulations on the incredible tools you created. The odometer reads 165785 km. However, another problem arose, the speedometer needle is not showing. All others are working. VCDS indicates the following errors: Address 01: Engine Labels: None...

I bought the recorder (EZP2023+). The program EZP2019+ generated 2 different readings (ST93C86 and M93C86) I don't know which one is correct. I opened the files with the VAG EEPROM but it was unable to login, I believe it is encrypted. Could you guide me how to decrypt the files? ST93C86.bin...

Yes. The program informs that it only supports addresses 1 and 17.

Hello gmenounos Sorry to bother you again, I would like to ask a question. I noticed that in the new cluster (VDO V06 - VQMJ09HH), there are no blocks 21 and 50 in Module 17 (Instruments). They are only present in module 25 (Immobilizer). Would it be possible to add module 25 reading to the...

Hello. I bought the cluster, but without success extracting the PIN either, same message as before ("Unable to determine SKC."). The software version is different "VQMJ09HH". At first I will try to disable IMMO to be able to start the car with this panel. It is suggested for future versions to...

Well, I only got the SKC from the ECU/IMMO (address 01/25), but that didn't work on the current cluster (address 17). My fear is that I will buy this new cluster and also not be able to extract the SKC from it. Do you know if kw1281test works on cluster 6QE920827 (Polo 2014)?

All block times are 0. Unfortunately I don't have an EEprom reader. I've made some progress here. Follow the procedure at this link https://sites.google.com/site/imnuts/ where I can get an ECU PIN number. How he managed to log in to "25 - Immobilizer" in VCDS, but couldn't log in to "17 -...

Hello, I had already tried with this version too and with some others, but the error is the same: Version 0.97.0-beta (https://github.com/gmenounos/kw1281test/releases) Args: COM1 10400 17 GetSKC OSVersion: Microsoft Windows NT 10.0.22621.0 .NET Version: 8.0.0 Culture: pt-BR Opening serial port...

Hey guys, First, I want to congratulate you on the tool, and secondly, ask for help. I have a Polo 9N3 2006/2007. I need to extract SKC, but I can't. I have 2 cables, the blue KKL (CH340) and the VAG K+CAN, but without success in both. I tried with the VAG K CAN COMMANDER program, VAG EEPRROM...