Thanks. Is exactly what I intend to do. Drill and plastic weld a bulb socket on translucid part of lenses and install two led amber light. That is the easy part. BCM has to be reprogram cause one bulb now is doing three functions. Brake, signal and position lights. I need to cancel signal...
Thanks much man. The story is a bit long. The lenses have a transparent sector on them but they are not used (dummy). No bulb , no wire. To do that you have to drill a hole on the back of lenses and install a bulb holder on it (plastic soldering) or spend $380 on ebay. After that you have to...
Thanks much man. The story is a bit long. The lenses have a transparent sector on them but they are not used (dummy). No bulb , no wire. To do that you have to drill a hole on the back of lenses and install a bulb holder on it (plastic soldering) or spend $380 on ebay. After that you have to...
Hello there, My name is Dan and I got an old post of yours about passat rear amber signal lights. I hate this red ones and if you are kind to help me out with some info about. Ive got 2016 passat tdi. My email is danpopa59@yahoo.ca. Appreciate
On the back part of transparent back lens I will install 1 pare of yellow LED. I hate this red signal lights. I will install yellow LED on that lens. Do you have a way to help me with electric diagram for a 2014 before August Passat TDI? Why before august? Cause after August is another diagram...
That solid state control module has to have two (left and right) signal light input. I would take that off That input and connected to led directly. I know what I am talking about but I try to save $20 from Alldata to get a B7 diagram for free. I've got a B8 diagram but that is not identical...
1 clasic bulb with 1 filament is doing all three functions. I would like to take the signal light adapter input and to bypass adaptor directly to yellow leds.
On my passat I've got one bulb (left and another right) for tail lights and signal lights and brake lights. I supose that is done with kind of adapter. In Europe they have 1 bulb for barakes, another for tail lights and another for signal light.In the transparent part of rear lens I would like...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.