Search results

I noticed that the center elect module didnt have any byte code for 13 is that normal? I read the car again and didn't find any codes for the control module only for navigation, airbag and passenger door. I placed the codes below. 01-Engine -- Status: OK 0000 02-Auto Trans -- Status: OK 0000...

I noticed that the center elect module didnt have any byte code for 13 is that normal? I read the car again and didn't find any codes for the control module only for navigation, airbag and passenger door. I placed the codes below. 01-Engine -- Status: OK 0000 02-Auto Trans -- Status: OK 0000...

Ok. thanks for the info I will take a look and update my findings.

Thank you Ill take a look and research a little more on what to look for in the live data and what your example means.

Thank you, I will have to take a look at the live data. as far as I am aware the BCM/J519 is the original one. What do you mean by BCM long coding is that like corrupted firmware on it?

I have 2012 Automatic TDI golf. The left break light comes on and stays on as soon as I use the remote to unlock the car the break light get full voltage to that light, and I didnt see any break codes on the scanner. It was hit in the left side before I got the car looks like they replaced or...

Ill keep everyone updated on what I find as I go.

@oilhammer that is good to know about the light not working with key off. ill also take a look at the fuse panel.

@ DrGERTol thanks for the tip. Ill try to get my hands on a VAG diag tool. or find someone here in Houston that might have one.

Hey everyone, I recently got a 2012 Golf TDI and have some electrical issues. I am going to dive in to the wiring diagram and start troubleshooting but I could really use some help or pointers on what to look for. I listed the issues I found and the car history below. 1- The break lights do...