Search results

Hey, if that stuff doesn't get picked up, I will come get it, I'm over by Bel Air in MD. Thanks, let me know

In Harford County these days, have you checked New German Performance in Perryman? Have seen them but never stopped. When mine broke, I swapped to the O2M 6-speed and put a peloquin diff in it( with help) But it came from Europe in 2 days with all the stuff to convert it.. seems it was 1600...

What part of PA?

Drove the old 99.5 last weekend. Not that fast but fun. The tall, all-season tires made it a little bit more drifty, lol. anyway. have to run what you brung.

Positive thoughts and prayer to you and yours.

Would like to know that one also.:confused:

I got the whole package with koni FSD, shine engieering springs, and shine rear anti sway bar and new bushings for the front arms. http://www.kermatdi.com/koni-fsd-shine-racing-complete-suspension-kit-vw-99-06-golf-iv-jetta-iv/ The 99.5 springs go bad and mine were shot. one side needed the...

Thanks Dan, You were right again! The old resistor was shot and rusty, I would dare say that the leaky heater core most likely did it in. Both are fixed now and running pretty good, may need to stop by one day for tweaking,

Thanks again Dan for your direction from your experience and insight. I will check it out.

A/C Question Dan, i Have 99.5 Jetta - AC works in fan position 1 but no blower; -Position 2 no AC or blower , AC light out -Position 3 no AC, Blower works, AC light out -Position 4 no AC, Blower works, AC light out there were recent times when AC would sometimes work on 3 then go...

Jimbote on the board here.

Thanks and that is a good write up, seems i had read somewhere about flipping the transmission over and just removing the bell housing and leaving the rest of the transmission together. Maybe you just have to have a way to hold it?

Can you just remove the bell housing from the 02J to get to the differential? or do you have to disassemble the whole transmission starting from the other side? Any thoughts or hindsight appreciated.

Check Bora parts too

make sure the fuel system is not leaking, especially around the return line. the plastic valve on the filter can leak to and make it hard to start. that is when mity vac comes in handy. if you have one, take one of the tips and cut it so it will fit in the quick disconnect of the return line...

Shes gone, I wish her well, the TiDi that is.

Do they put them on cars too:confused: pic of either would be good Sorry couldn't Resist.

Make sure the starter contacts are clean and battery charged up. It has t spin pretty fast to to be hot enough to ignite the spray.

Not really time for that, but good idea, just needs to go as much as i would like todo a project with it later. Pms answered

Looks like marital issues is going to cause my old 1985 TD to be out of the picture. it needs the engine work, probably sleeves from running vegtable oil, it is pretty dirty but could be cleaned up. It may be a wolfsburg, has the emblems on the fenders. Is there any interest in a project...