Search results

Passenger seat does not need the seat belt latch plugged in. I wired in a 4.7ohm between the Black and Blue wire on the "seat side" of the airbags plug. NO codes, All checks out via VCDS Auto-Scan, no codes or faults at all. Time to design and begin to build out my interior for...

Thanks! Guess I will just leave the seatbelts "polycontact" disconnected and only focus on the 4.7ohm resistor for the airbag!! You guys rock. I will report back with any anomolies.

Nah, I may be confused in the first place. 😝 So, I dont have passengers except on very rare occasions so i dont recall if it had the occupancy sensor. What does the "PolyContact" sensor that is wired up to the buckle latch do?

Per another thread, how I interprete it, is that when the seatbelt is unplugged it throws a cel OR seatbelt warning. In the thread, it was stated he just used a triple square to remove the buckle from the passenger seat(kept the buckle side plugged in). Saturday, once i wire in the...

Removed center console the rear and passenger seat to start my "camper conversion." I intend to build an entire storage system front to rear which will make a platform for an inflatable mattress(single person backpacking type) With those 3 seats removed i got ambitious and removed the...

Selling one of your extra hoods? PM me, I am local(across daytona/jax area) for the next week.

My understanding is that it is "Turbine Chop" NOT Compressor Surge. I personally feel it is NOT harmful. Reason being, my car was straight piped for 150K+ miles, the ORIGINAL turbo went out at 327K miles. 150K of those were tuned and driven hard where nearly every shift provided the "bov"...

Denver Craigslist has a clean mk4 jetta wagon for 10,500. Good luck fighting insurance- Clark Howard always suggests they owe your the REPLACEMENT value.

Manual windows and no sunroof. Love it. Any speculation to what the smoke is? Oil in the exhaust burning off[ie:turbo] or internal damage? I would LOVE to take this as a project; not sure i am in that position.... (Its also a TWIN to my 2001, white 4 door golf, which i love) **EXTREMELY**...

Literally been doing this for YEARS. No problemo, G.D.

1. Unlock the car 2. Smack the door handle firmly 3. Check function like normal

What if its suppose to arrive fully intact and ready to install?

The replacement package looked good. Crisp outer box, with very slight crumpling on one corner. original box showed up to florida relativelt "destroyed." The other axles from CG both boxes werent crisp but werent destroyed, if i recall correctly. Hard to think back that long ago..............

sending my applicatjon into GKN now. Maybe i can take your advice and do it right(where its supposed to be done, at the factory...) ................. You can lead a horse to water, but you cant make him drink. [about me refusing to rebuild these brand new axles]

Honestly, why arent the GKN Parts from reputable dealers coming in pristine, ready to install, working order. For $275 dollars why the **** am I having to rebuild my brand new axles. If you buy a new microwave thats not functioning, are you going to pull the back panel to resolder a wire thats...

For the record, I went to autozone because I want my ****ing car driving. Part number 7559N(per memory) does not fit, the inner joint bolt pattern is larger than the trans side of my VW. Thats the part number i googled and the one they searched and found. To add, those axles look like jokes...

Would you believe me if i told you the replacement axle from IDParts is missing its ball bearings as well. Im guessing thise are in the boot, rather than ontop like the previous from IDParts(which THIS one is the replacement for) and they were ontop for the passenger axle from Cascade...

Check the junkyard off Santa Fe, Littleton U Pull. I swear they always have silver mk4s in the lot. In general, they are pretty good foe mk4 parts.

Drivers side was missing 4 balls not 2. Struggling to get all 6 balls reseated now... This is the longest axle job ever. Had to use all of my body weight on a breaker bar with a 7 ton puller to pop the axle out. Bearing is trashed and spent a whole day trying to find a shop that would accept a...

Is the plastic piece on the steering shaft disintegrated? about 12 inches from the airbag, under the dashboard, top side of the shaft. Steering Column Bushing https://www.ecstuning.com/b-genuine-volkswagen-audi-parts/steering-column-bushing/1j0419579/