Search results

Does anyone know if i can get a newer diff code for my vehicle as the installed one is noisy due to wear or maybe oil loss, were there any recalls or diff codes to avoid? My diff code is ETS thanks in advance.

Need to tighten up this nut and bolt but don't have any tools with me (on holiday) so need to buy them! Help!! What size spanner in mm's fits #6 N10106402 - #5 N90625901 cheerz!!:D

Hi had many problems with no starts and tracked it down to 109 relay which had a bad solder joint, re-soldered it and now no problems touch wood :) see pic below!

take a picture and show us :)

nice!

Haven't checked, should i do this? This started happening after I have had the manifold of to clean it? cant see how this would cause any damage to anything so its got me stumped, I will check timing and glow plugs and report back.

Same thing happens to me since I cleaned the egr. power is ok tho just very smoky and faltery on cold start up.

Hi m8 although my engine is different to yours I found after cleaning my EGR valve it started to leak quite a bit of oil, see picture below (EGR is top left) Richy

Parts Delivered New parts are here just need the rain to stop so i can fit them :D See picture below Also I dropped the oil the other night and installed a magnetic sump plug, see video below ;) http://youtu.be/vjRmrYqKmPM

It maybe not needed but I would like to obtain the correct one.

Hello, just a quick question on the Crank holding tool for timing belt installation Which is needed for for the AHF engine? is it the 12 or 1 o'clock version??? :confused: see pictures below. 12 o'clock 1 o'clock

Yeh the lifter spins as freely as the rest and the head doesn't bother me in the slightest :)

Like i said its just temp for now the cam and new lifters are on order and the head is fine nothing to worry about.

Job done Ok changed out the bad INA lifter and the car is running fine now :D here is the damaged lifter: Here is the damage from the camshaft striking the loose pieces of metal from the INA lifter and here is the damage to the camshaft: This is just a temp measure for now I will be...

Thanks Frank :D

Yes I will take some pictures but will make sure I use my digital camera and not my mobile phone :D

thankyou :D

OK Vince you've twisted my arm the car will stay parked up till i get the parts. :)

PD engines require 5W40, Here in the uk 10w40 Part Synthetic oil is sutible for my car. :)

Had a look for the lifter pieces around the cam area but non to be found, I am praying they are stuck someplace forever not causing any further damage because a full engine strip down is out the question, the car is still in use for school runs 5 - 6 mile a day until I get the parts so fingers...