Search results

  1. sali87

    Audi Coupé quattro 2.5 TDI

    Intercooler is uni 400x600x76mm The heavy left is AAT Gesendet von meinem S60 mit Tapatalk
  2. sali87

    Audi Coupé quattro 2.5 TDI

    3.5" / 89mm ? Gesendet von meinem S60 mit Tapatalk
  3. sali87

    Log of quarter mile times

    VW Golf 2 1.9tdi 2wd 130pd 6speed 02m John Deere turbo 380hp without n2o 11,4s @200kp/h 433hp with nitrous but problems with tracktion and clutch. 11,3s and 205....210...211kp/h Gesendet von meinem S60 mit Tapatalk
  4. sali87

    Audi Coupé quattro 2.5 TDI

    ... Gesendet von meinem S60 mit Tapatalk
  5. sali87

    Audi Coupé quattro 2.5 TDI

    Exhaust and intercooler piping are finished Gesendet von meinem S60 mit Tapatalk
  6. sali87

    Audi Coupé quattro 2.5 TDI

    Turbine is heavy. Spool needs time. In 5th gear 1,5bar @ 2500rpm is possible. Up to 3500rpm is the time for spool ok. Gesendet von meinem S60 mit Tapatalk
  7. sali87

    Audi Coupé quattro 2.5 TDI

    ... Gesendet von meinem S60 mit Tapatalk
  8. sali87

    Audi Coupé quattro 2.5 TDI

    My car project still in progress. Audi Coupé quattro 2.6 V6 fitted 2.5tdi 5 cylinder Edc15 Volvo engine AXG pistons H-beam rods Hiflox 0.341 GTA3576klnv Dbilas Cam AAT crankshaft 6 Speed V6 TDI gearbox Still 2,2....2,3bar and little smoke At the time 270kw/367hp and 660nm Gesendet von...
  9. sali87

    John Deere s300v boost creep?

    Compressor over 80mm Problem was vtg. But onley when it was hot Gesendet von meinem S60 mit Tapatalk
  10. sali87

    John Deere s300v boost creep?

    This is the last turbo. Gesendet von meinem S60 mit Tapatalk
  11. sali87

    John Deere s300v boost creep?

    Turbo is stock. Vanes are good. With reducing fuel er can handle it. But loose 50-60hp What is with cam timing? We set it a bit late Gesendet von meinem S60 mit Tapatalk
  12. sali87

    John Deere s300v boost creep?

    Bosch fla300 dyno What is strange? Gesendet von meinem S60 mit Tapatalk
  13. sali87

    John Deere s300v boost creep?

    We destroyed two s300v Vanes full open. This turbo is new Gesendet von meinem S60 mit Tapatalk
  14. sali87

    John Deere s300v boost creep?

    We have a big John Deere turbo on 1.9 PD. We have problems with boost creep. Boost claims over 3bar when to much fuel. Does anyone other same problem? Gesendet von meinem S60 mit Tapatalk
  15. sali87

    Static timing with big nozzles

    In 5th gear 1,5bar at 2500rpm From 3000....3500rpm it feels good to drive. But on 2.5tdi 5cylinder. 2,7bar Gesendet von meinem SM-A510F mit Tapatalk
  16. sali87

    Static timing with big nozzles

    Without fuel pump and new fuel filter no problems yet. The 0.275 came from canada, I mean. They drive well. cold start now fine. Gesendet von meinem SM-A510F mit Tapatalk
  17. sali87

    Static timing with big nozzles

    now I have installed 0.275 Hiflox nozzles in my T4 transporter. stock 11mm pump. I have the same Problem with needle lift sensor. sometimes no signal on idle. 220bar op like stock since 6 years I had no problems with 0.260 what can I do?
  18. sali87

    2559v help ?

    The compressor can not give much more than 2 bar Gesendet von meinem SM-A510F mit Tapatalk
  19. sali87

    turbo technical database

    Anybody knows this turbo? Gesendet von meinem SM-A510F mit Tapatalk
  20. sali87

    WANTED: Bosio race 683 nozzles to fit v6 tdi engines

    Yes, we made same experience... Gesendet von meinem SM-A510F mit Tapatalk
Top