I did not. A friend has a small shop, and he is the only one that has done any work on the car since I have owned it. I have enough other crap to work on.
I have a gtd1449vz hybrid and silencer from xman on my 2015 golf crua. I also bought a cr190 intake pipe. Went on no problem, and I returned the cr190 intake pipe as the stocker works just fine.
I came from a lifted stock alh 5 speed with big tires to this 2015 6 speed. So the performance improvement was amazing. A month or 2 later I did stage 2 malone with rawtek delete. Very nice. A month or 2 after that I did xman gtd1449vz hybrid turbo with malone stage 3. Very fun car to drive...
After the rawtek delete, I topped off the expansion tank and let it run with the cap off. Didn't go down. Went for a short drive, the alarm came on and I filled it back up. Went a few miles home, and found the coolant bleed on vcds. Couldn't find any instructions online, but did what vcds...
With my manual hvac, click basic settings and there is a box on the right where you can check boxes to see values. You can then turn the temp dial, and it will show you actual vs requested at any temp setting.
My temp door motor was making noise when I bought my golf tdi s with manual hvac. I bought an updated oem one and had it installed. They never performed the basic setting on it. When I checked requested max cold value was 17, and it was at 27. After the basic setting, it was down to 22 and...
I have a 15 golf tdi s 6mt that replaced my 00 tdi beetle. I was going to leave it stock because the performance was greatly improved. But I can't leave anything alone, so I recently rawtek deleted it with malone stage 2 after a couple months of ownership.
I just recently ordered an xman...
So what do you think happened here? Car is newish to me me. Maybe 6 or 700 miles since I got it. Car has 77k. It was on the lift for exhaust work when my friend spotted this. The trans is damn near empty.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.