Search results

So, cars at dealership, they called today saying they were approved of a new head and valvetrain for warranty. I didn't think of asking if they were replacing pistons and such as well, but did email asking if they were marred and for a possible photos. Thought's on what I should ask or be...

Alright have car back, doing some testing I get big fan to run and small fan does not.

I haven't checked fuses yet, I just ran it by dealer and said this should be covered under warranty. Call me when you get around to looking at it if it's not covered. They wanted over $600 for this repair and were going to replaced the big fan. I'll go pick up this evening after work and will...

Thanks, I was hoping the fault would be covered under warranty since I had just had the HPFP replaced under warranty for leaking and had the alternator replaced because fuel was leaking on it. I mentioned could the fan be replaced since the alternator was replaced maybe it shorted the fan, but...

First thing, AC works phenomenal when in motion. Car will run hot if I sit in traffic for a very long time. Below is my VagCom error code. Any help is very much appreciated. I'm wondering if I should just replace the big fan with the control module. Address 01: Engine (CJA) Labels...

Another question, I’m currently waiting on some wheel speed sensors and do not know if this is related, but sometimes when I first start car and 10 mins of driving the gear on mfi is incorrect and the speed is wrong. I can be in 1st or 2nd and mfi shows 1st. 3rd can say 2nd. 4th - 6th can say...

Speaking in riddles for me unfortunately, it probably doesn't help that the program I used looked nothing like the one you just shared a photo of. I did see Address 19 CAN GATEWAY (J533) and I'm assuming Byte 3 is it's Fault Priority. However maybe I overlooked it, I didn't see Address 65...

I did clear all codes and they all immediately came back tonight. I tried a new battery, but didn’t have VCDS at the time to clear codes to see if they came back. I just installed new battery ran a 5 mile loop came back and changed battery back out to the prior one. I’d imagine most of this is...

Oh, the cable was purchased new. Also click the link in the original post. It has the code and everything the cars doing when test was ran with ignition in. I’d appreciate a video. I’ve been watching some YouTube videos while I can at work.

Yes, I bought the car 2nd hand. It only had about 36k miles on it when I purchased last year. So I can manually make the fan spin up in VCDS? Just checking, did the .pdf link work for you?

VCDS PDF Here’s my first run with Ross-Tech VCDS. I did this with the car turned off and ignition on. Should I test again with engine running? 1. I know I have a bad fan, or at least I thought it was a bad fan. It says movement restricted I’ll take another look tonight as it says intermittent...

I have ~40k miles on a 2012 Golf MK6 Manual TDI. The serpentine belt failed on me this morning going down the interstate to work. All lights came on like a Christmas tree and lost power steering. Got to work and popped the hood and saw the belt ruminants. So I plan on ordering a timing belt...

I have one.

update, going to look this weekend.

it's pretty nice, I was expecting a crack in dash. it also has a cracked windshield.

That would be great if I had it. I always knew i needed to invest in that. Now I need to google those cheap amazon cables to see if I could get it by this weekend, or I guess I could ask if I can hook up an analog boost gauge since it has the hole right up top in his EGR delete. I've never...

I'm starting to feel that, I need to discuss more on what he's feeling is a fair offer. Need to think how I should bring it up. The diff gears are stock 4.10, makes me think it's open diffs as well, but I didn't ask. I haven't gotten photos of the interior yet sadly I need to message him some...

so the guy said that the truck didn't have rust on the frame and only rust on body was at bottom of fenders which he sent me a pic of. I'd of course take a magnet with me. I did a very generous price break down and I feel offering 6k and hoping for the best may be what I try. I did let him know...

if the deal was right, what would you guys give for this. Realistically, the guys asking and I have not asked to go any lower. So far only detail on the truck. I do plan on building myself still, but I could use a lot of his design to better my own as well as mimic that wiring harness.

Here i asked what's left of wiring harness, what IP is on the engine, if the truck had hi steer installed, i