Search results

Great point, as the Euro Passats that came with a factory six speed could be using a different subframe than our N. American version.

Nice thanks, I was able to find the part numbers I listed out of lithuania. The numbers I listed will work, but their are a few different numbers for the same or similar parts I came across as well.

Greetings 6 speeders, I was the one that did the six spd swap for MILESB, I am prepping another swap and as per Miles a few posts back there are a few items we could add to the parts list: Transmission support part numbers The last swap we used 8D0 399 114 AC and 8D0 399 113 AH for...

thanks again Steve, it is a GQQ

Thanks Steve, Ill take another look as the site I checked at said otherwise. I trust first hand experience in your case to be more accurate !

https://photos.app.goo.gl/G2UdQhCWYweffzkz9

Got a 0A4 5spd transmission but the model code FP15 seems to be a unicorn. Any one seen this code before. It's supposed to be from a 2006 TDI Jetta. Any insight is much appreciated.

Got a non responsive abs controller 1J0907379G in the car and have a replacement that is very close on the part number Not sure they are compatible with each other. Replacement is from an '03 Jetta. Beatle is an '03 Can't find anything definitive and hoping someone with a licensed etka or...

Got the engine in and started with the 6 speed and seems to work fine. I was having deja vue that I'd seen this item in the past while working on vw's, but drawing blanks on where. Thanks for the affirmation, was just was worried maybe it went somewhere critical and if missed in assembly would...

Anyone know what this part is/where it goes. My friend has me installing for him and I just don't recognize this piece or anywhere it might belong. It does not have a part number stamp The inner area is definitely tapered. So seems to be some kind of retainer. For size reference the bigger hole...

Resolved So the fix in this case, to get the second digit ie 000011 was to replace the column turn signal assembly. I tried using contact cleaner in the original switch as per wingnut's write up, but no go. Reseated the ecu connectors, no go. Hope that helps others narrow down where that...

all the appropriate lights come on but the one, so the field looks like 000001 when it should read 000011. The brake codes are 000 not active, and 011 when active. All switches are giving a 1 when toggled as indicated in the tables

I'll print out the table and do another check to see and make sure that both break switch digits are working. but pretty sure they were.

So what I see seems to be all normal, but for one thing in the Field 4 Data field 1 for ccs switched on is at 1, but the second digit is not showing (indicates 0=Cancel/off activated) Compared with my passaat and that digit is lit as 1. After reading confirmed that there is no cruise light on...

I used vagcom to determine that cruise is enabled, can see all the switches functioning ie they activate zero or one for feedback, but the cruise does not engage, no dash light comes on. Never had experience with cruise not working before. Anyone else encountered this and suggest a first step...

Ditto on Roseland, purchase there all the time also. Can't go wrong with Brian

I generally do ok with Autopartsway, but they sent me a defective caliper Bracket where Cardone (the remanufacturer) ground through the end of the pin Chamber. I am currently battling them to back down on their parts return process. They have been in touch, but not keeping their word on...

Resolved So, Things all got finally resolved. Took a couple of weeks to get this done. What to me was as simple as "send me the right length bolt" had to go through their engineering team to have them analyze things. All that was needed was to shave down the head on one of the bolts that...

parts that will fit your b5.5 5 speed swap Oh yeh, absolutely sure. I have the short throw shifter, which is awesome and super well made. I also got the solid bushings for the stabilizer bar, and that fits perfect. the shifter coupling assy that I order is a perfect fit other than the bolts...

Hey Guy's just letting anyone contemplating the JHM solid shifter linkage upgrade know that I recently received mine on OCt 18 and it was delivered with bolts that were not correctly manufactured. (Should not be used) I have been hitting them up for answers on machining the correct parts for...