Search results

so far it seams to have worked . thanks guys

thanks for the thread to rebuild the pump . while i have it out , it makes sense to change the internal O ring at the same time , besides ,the wagon has 380 ,000 miles on it .

yes . its loose where it goes in the pump . i looked at the thread you sent . thats exactly what i need . i'll let you know how it works out ,and thank you so much for the information .

hay guys . i am able to wiggle the tube from my vacuum pump for the booster , so it must be sucking air into the head . i think it is pressurizing the inside of the engine block . when i open the oil fill cap , it sounds like a can of soda PSHHH . and have oil leaking around the fill cap . can i...

thank for the input guys . ill let you know i make out .

do you know if they make a rebuild kit for these pumps that would fix the problem

can i fix this or does it need a new vacuum pump .

that fitting wiggles around quite a bit , but i can't pull it out of the pump . how much play should there be , if any .

im not sure where you would this problem . anyway , how much pressure should there be in the crankcase when running . on my other engines , i can add oil or dye to the crankcase while its running . i tried to put dye in my ALH (wile running) , to find my oil leak , and non of it went in . went...

i solved the problem . took out the instrument cluster , took it all apart , used a soldering iron and pulled the abs LED rite off the board . reassembled and reinstalled the cluster . no more light . took it back to be inspected and passed . thanks for your input guys .

thanks for the tip it seems to be working thanks again .

OK guys another problem has just arose . my rear window goes up and down on its own and will not close . it stops about 4 inches from the top . if you hit the switch to close , the window goes down then up to the same position ( 4 inches from top ) and stops . i'm confused .

thanks , i'll look into that to program an ABS delete .

as soon as they plug it in , it comes up (01276 - ABS hydraulic pump) no pass

ny long island nassau county .2 different inspection stations failed me

the pump pump again this is the second pump

i wouldn't mind the abs light staying on all the time , but they will not pass it for inspection in NY . no beeps or anything just the abs light on all the time , but brakes work fine otherwise

I wouldn"t mind the abs light on . but they will not pass me for inspection in NY .

have had nothing but problems with mine since 2005 . now this is the second pump that i have to replace

convert ABS to non ABS breaks on MK4 jetta wagon