Search results

It's great to hear that you're liking the new Wavetrac. 👍 They're definitely a nice upgrade year round, but especially in the winter when traction isn't always the best. One question, why the different size front and rear tires?

I'd say that you definitely lucked out if you found an all aluminum SMIC in the trunk that's pretty much brand new. Unfortunately I can't think of anything that's off the shelf for a piping kit for the new SMIC. You might be able to find an upgraded top or bottom piping kit if you do some...

Rosten rods are now SOLD.

If it was me, I'd upgrade the piping and the SMIC running a GTB2056VK. Here are some options: Upgraded SMIC: https://www.ebay.com/itm/233418634862 https://www.amazon.com/ajp-distributors-volkswagon-intercooler-replacement/dp/b07z6d2sb8...

Bump. Open to offers.

No problem. Glad to help out and it's great to hear that you ordered the 3030 to install in your exhaust system.

I didn't build the exhaust system, but yeah, the hangers had to be welded to the new exhaust system.

The XL should definitely do the trick to quiet things down. Yep, the standard Aeroturbine muffler does sound pretty mean when you really get on it. I'll have to see if I can find a video of it on the dyno to let you hear how it sounds. It might take me a day or two to locate the video, since...

Yeah, the 3" Aeroturbine muffler did the job of taking out any rasp and I don't have any drone. If you want to quiet it down even more, you could go with their Turbine XL version...

I believe that Danny sold the car about 3 or 4 years ago when he was moving to San Francisco or somewhere in California if my memory serves me right. Let me see if I can find him for sale thread. Found it after going through his most recent posts...

Apply some degreaser to that area to help clean it and then use a rag to wipe the area clean so you can better see the numbers.

It should be right on top of the transmission itself. Unfortunately I don't have a picture of where it's stamped on the transmission. But I found this website that explains it...

If you already have a Flashzilla v3, then you might want to consider going with a Malone Tune and see if you can find a dealer near you that also has a dyno to Tune the car on. Just be aware that Tuning a TDI on a dyno isn't the be all, end all of Tuning your car. As long as you have VCDS, you...

I'm honestly not sure. What is the current state of the car? Post up some pictures when you get a chance, since that'll help to see what kinda condition the car is in.

What do you want to know about the GTD1752VRK?

To post a picture you can either upload it to the TDIClub photo gallery and then link that picture in your post. Your other option is to open an account on an image hosting site like... imgur.com or imgbb.com or imgbox.com After you upload your photos to the image hosting site, copy the forums...

The different tuners you could look into are: https://m.facebook.com/profile.php?id=100027352466005&eav=AfZx_5HgGoCAhlZ0W95aC5VexKxApxCSmTCidQjubkpWs-6PrGWG-uf2S0QvNW6O8fU&ref=page_internal&mt_nav=0&paipv=0&_rdr https://chiptuning.ca/ Sold by...

Sorry to hear about your dad. 😥 I was wondering if he was making any progress on the build and now I know why there wasn't that much progress. It's great to hear that you'll be taking over the build and will be seeing it through. I know your dad asked me a few questions about my build over...

The length was short by just a tiny bit or at least that's what I was told, since I'm unable to measure the connecting rods myself. I can get a second opinion from a friend that's done engine work before, just to verify that one of them is slightly out of spec if you're interested in buying them.

Unfortunately they won't work in an ALH. They're for a PD150 or BHW crankshaft.