skaude's latest activity

  • S
    skaude replied to the thread BiTDI 4motion ALH passat b5.
    .320 gibonta @280bar
  • S
    skaude reacted to [486]'s post in the thread BiTDI 4motion ALH passat b5 with Like Like.
    what size nozzles? there's not much selection in nozzles that are big enough I've personally killed pumps running too small of nozzles...
  • S
    skaude replied to the thread BiTDI 4motion ALH passat b5.
    thing is, ive talked to quite few high hp alh guys and they all were like "yeah just stock 11mm pump and stock lines stock injector...
  • S
    skaude replied to the thread BiTDI 4motion ALH passat b5.
    Ive narrowed the injection pump problems to 2 possible causes: -Bad luck with used pumps -Fuel filter micron rating Filter element is...
  • S
    skaude replied to the thread BiTDI 4motion ALH passat b5.
    Some numbers about the build so far: Ive killed 9 injection pumps. 3 this year in 4 weeks. Turbos can boost 4.1bar @ 3000rpm, with...
  • S
    skaude replied to the thread BiTDI 4motion ALH passat b5.
    This is the turbo setup ATM. HP Garrett GTB2056VZK Cw: 43.4mm / 56mm 6+6 Tw: 43.1mm / 47mm LP Holset HE500WG Cw: 63mm / 99mm 7blade...
  • S
    skaude added the media item compound turbo to BiTDI.
    HE500WG GTB2056VZK
    compound turbo
  • S
    skaude replied to the thread BiTDI 4motion ALH passat b5.
    Setup is long gone because it was becoming restrictive, but basicly the setup consist of n75 controlling the vacuum, and another to...
  • S
    skaude replied to the thread Biggest turbo used in 1.9TDI's.
    Im happy to see you still around these engines! wish you the best with the project, its been a long route for you, and definetly not the...
  • S
    skaude reacted to andy2's post in the thread Biggest turbo used in 1.9TDI's with Like Like.
    I've backed things down a bit in terms of turbo's.The new engine build will get the s300's again.Manifold turbo compressor is 58mm...
Top