Recent content by powerram250

You're welcome! I wish I could figure out how to post pictures on here. Sometimes a picture is worth a thousand words.

On the back side of the Mobil 1 ESP jug it does say VW 504 00, 507 00

That's true I forgot mine does take more than 5 quarts. I've only had it long enough to do one oil change so far.

Yeah with today's stupid inflation that's a steal of a deal. You must have bought these before everything went to he🏒🏒

https://www.autozone.com/motor-oil-and-transmission-fluid/engine-oil/p/mobil-1-esp-full-synthetic-engine-oil-5w-30-5-quarts/1178024_0_0 Hopefully this link will work. 5 quart bottle of VW 507.00

Thanks for the replies. I'm liking the looks of Mobil 1 ESP 5w-30. i see my local auto zone has it for $6.79/quart, when you buy a 5 quart jug. Thanks again, you guys are great people.

Advance auto use to carry this. What is everyone running in their 2015 CVCA engines? I'd like to be able to pick it up at my local parts store or online pretty easily. I know it's got to be 507.00 approved. Thanks.

I found the mounting spot. Directly under the metal bumper more toward the driver's side. There's a tab where it slips (clips) onto.

Rebuilding my 2015 Passat. Just wondering where the ambient air temp sensor clips into. On the front bumper area. Any pictures would be great. Thanks.

That should get me. Thank you for sharing with me.

My car was in a wreck and I need the diagram of the 3 wires that go into the ac pressure sensor that plugs into the line directly behind the passenger side headlight. It's a 2015 Passat TDI SEL. A close up picture would do. I've circled a picture of what I need but tried everything to get the...

Just found this on another site: Tighten camshaft sprocket centre bolt [14] . Tightening torque: 100 Nm. Hold high-pressure fuel pump sprocket. Use tool No.T10051. Tighten high-pressure fuel pump sprocket nut [16] . Tightening torque: 95 Nm.

Does anyone know the HPFP sprocket single bolt torq along with the single bolt for the cam sprocket. 10 NM doesn't sound like enough for the cam. This is on a CVCA engine. Thanks.

Okay, that's what I was thinking. Thanks so much for the help!

On the cam sprocket I've loosened the little torx screw with the cam lock engaged but the sprocket will not "free spin" within range of torx screw groove. Is mine just stuck or is that it?