Recent content by maintenance247

And on the Cjaa it took me 1000 plus miles to achieve all Parameters , I was losing hope after changing a glow plug for a while 😂 I didn’t take the vw fix Or cash so it’s still cheating 😂

The studdar can be fixed by the 23 ak Update I have had it on my 2014 tdi touareg At warm up / driving initially i have not experienced it in a while and would rather not have an update done 🤨

I’ll live with it 👍🏻👍🏻 i Hope you figure out what your issue is Do you have a video ?

Does it sound like any of these https://youtube.com/shorts/z1oA0LJ_jA0?feature=share https://youtube.com/shorts/SfMmveWI6sA?feature=share https://youtube.com/shorts/kWFdxhoj37c?feature=share

Has your start up rattle improved?

Is there a fabric without the foam Just basic fabric ? Im about to leave my headliner out I actually like the look of the exposed interior

Same thing on 2014 Touareg tdi r line From 80k Miles has Always done it I hear many stories of people even having all parts replaced and the Noise happens soon after .... just drive it and maintain it 🤷‍♂️ i even lookin Porsche forums at the Cayenne Audi forums etc etc many suvs shares this...

Yes it is slow motion , the sound is just normal engine idling etc , the stuff on the upper roller rubs off fairly easy plus I was able to push down on the belt under roller and felt zero play and appeared smooth. I also contacted the supplier where I bought the parts and belt material transfer...

I had similar issues turned out to be a loose allen head bolt for the front right strut / shock tower in the engine bay also on another occasion a few of the bolts on the subframe were loose, I tightened them and haven’t had an issue since. The worst clunk was the loose subframe bolts and I was...

Simple job on my 2010 Jetta tdi Take skid plate off 16 mm wrench to release tension on SERP. Belt Lifted engine a tad with jack w/ a piece of particle board which gave clearance for the removal tool 10mm six point box end wrench on one end of tool which meets engine mount so all you have to do...

Hope I’m in the correct area. I have a 2010 Jetta sedan Cjaa 2.0 liter I did the timing belt all idlers, belt, new tensioner , water pump etc, New bolts, correct torque values etc in 2017 at 119k I just figured I would peak behind the upper timing belt cover tonight and was surprised to...