hey_allen's latest activity
-
Hhey_allen replied to the thread What did you do to your MKIV today?.I had that column switch connector wiggle it's way partially apart, and fixed it by pushing it back together. I ended up adding a zip...
-
Hhey_allen replied to the thread What did you do to your MKIV today?.I bought a tube of Sachs 4200 080 050 clutch grease for my various manual trans cars. It seems to be heavier than many bearing greases...
-
HMother Necessity, or maybe just laziness, has struck again. After shopping around and deciding I didn't want to pay stupid shipping for...
-
HCompleted the 20k service—oil & filter, plus fuel and air filters. Screws on the filter box are getting pretty stripped. Wonder if...
-
Hhey_allen replied to the thread What did you do to your MKIV today?.I've heard good things of the Kufatek harnesses, but don't have any personal experience with them...
-
HPicked up two heated front seats. Driver side needs a small patch job but they're in much better shape than mine. Just need to grab a...
-
HInjectors are supposed to leak compression - they must be, since that's what happens if you follow the Bentley installation procedure 😳
-
Hhey_allen replied to the thread What did you do to your MKIV today?.If you're talking about this stuff: D-174-003-M2, I found a search result showing it as an alternate part number for an Elring Klinger...
-
HResurfaced my headlights with the 3m kit. Been about two years since I did it last. Tried some clear coat this time to see how that...
-
HI wouldn't use those dots on the crank sprocket to find TDC of the crank. Assuming your new FW has the TDC mark, I'd do clutch & rms...
-
Hhey_allen replied to the thread What did you do to your MKIV today?.I'm pretty sure it's because this clutch set is intended to be installed as a loaded set, instead of mounting the pressure plate after...
-
HI have experienced multiple limp mode instances with no CEL (pulled over and scanned after it happened). I have also had it throw a CEL...
-
HFinished up getting the driving lights mounted. I suck at taking pictures of the process... I'm *doing* the process. I could never...
-
HNot real high mileage for an ALH, but had to plan ahead with the trip reset...
-
HTotally wrong bulb for the reflector, throws light everywhere it shouldn't. Same concept as LEDs but worse, because the bulb is even...
