Drivbiwire

Good afternoon. I hear you're the go to TDI mechanic in Boise. I'm wondering if you'd be able to change a timing belt for me on a 2014 Jetta?

Thanks!

I use a diesel fuel additive because of the ULSD on a deleted Mk7 GSW TDI . I sent a used oil analysis on a Mobil Delvac Extreme to Blackstone and there was mention of lower than usual but acceptable viscosity at around 5,000 miles. I read your note about OCI's every 5000 or so miles and why that is not necessary. Have you ever heard of additives that break down oil viscosity?

hello, do you still rebuild o2j gearboxes? if so, please shoot me an email - ggaunty@gmail.com or text (213) 256-1266

thanks!

Hey, DBW,
I’m considering an tune upgrade on my B4v.
it’s mostly stock, catalytic converter has been removed, and it’s getting a new upgraded clutch soon. I have a Malone stage 2 chip, and need to purchase new nozzles. I’m considering Bosio 1019’s. I’d be grateful for your help in getting this tune right. Thanks, Sully

Hello, I’m seeking help regarding directional mating for a bearing cap with a rod. ALH engine. I see the Audi symbol on the rod and VW symbol on the cap. I see a large and very small bearing recess on the cap and likewise on the rod. I assume the recess’ are mated on the same side vs 180 degree and opposite of each other. The Bentley and other material (all data) does not describe the directional install well.