Recent content by aullein

  1. A

    VMR710 19x9.5 500$ Central Fl

    Square set up. 45 offset I believe. Gunmetal. Nice concave look. I have hub centric rings to bring wheel bore down from 66.6 to 57.1. ALL rims have curb rash and some imperfections. I can text whatever pix you want to show you the shape they are in. When on the car they look good and you cant...
  2. A

    WTK: Any Interest in 2012 Passat TDI Manual KW and Rims

    2012 Passat TDI with a 6 speed manual. tungsten silver with KW coils and 19x9.5 VMR 710 gunmetal square set up with 5MM spacers up front. Minor blemishes on lower corner of front bumper and couple scratches from previous owner behind rear wheel. rims have curb rash on all. Other than that pretty...
  3. A

    Release/Throwout bearing

    Have this sound all sudden but it does go away when I press in clutch pedal. Research tells me the bearing or maybe pressure plate. Is it safe to drive like this ? Also how much labor is involved for this fix? I am Assuming the tranny needs dropped. Hoping can put it all ok VW card. Anyone...
  4. A

    Fuel filter change

    Do I need to prime/bleed through vcds or can I simply just start the car after switching the filter out?? I don't have vcds available and want to do it in driveway.
  5. A

    Total Engine Oil??

    Due for my 60k and the dealer over the phone told me they had this oil in stock: I thought Castrol LSX Gold was the OEM oil? Anyone ever use or heard of this??
  6. A

    A3 P8 Camber Plates Compatible??Technical gurus chime in Will these work on our cars? I have done a lot of research lately on applicable camber kits for our cars and for the front it seems only plates...
  7. A

    Camber kits or plates ... Who Makes Them

    Looking to straighten out my camber... I'm maxed out on the eccentric bolt and still at -1.8 and -1.9 on the rears. I'm not even slammed I have kW coills and on 19x9.5 and still have two finger gap. I see ECS has two arms for the rear but they are 415$ or so. I have tried 034 motorsports and h&r...
  8. A

    Rear camber adjustment

    do we have a bolt with an eccentric washer in the rear to adjust camber? If so where is it??
  9. A

    CR190 GTD Turbo Kit for NMS Passat

    I have been in touch with ARodriguez as he is installing the CR190 GTD kit on their car as we speak. He mentioned to me that two of these kits were already running on cars but he didnt know who. Does anyone on here know who it is?? I would love some feedback on how its performing.
  10. A

    GTC1549VZ Comparables

    I see these are sometimes referred to as CR177 turbos. Is this similar to a CR170 just a later version?? What would be some ballpark figures on power numbers?? are we talking stage 3 CR170 hp/tq #'s if put on a NMS passat?
  11. A

    DRL replacement LED... Where can I find them??

    Hey guys where can i find replacement LED bulbs for my DRL's?? I know these cars are very finicky and i don't want any errors on the dash... a plug and play is what I am looking for.
  12. A

    Torque App and clearing CEL's

    Can torque clear CEL's? Does it just do some and not all or none at all?? I have a p202b code for my '12 Passat tdi and I can't get it to clear. Maybe it's not one the is meant to be cleared ?
  13. A

    P202b diagnostic code

    got this p202b code today. It's saying the heater for the DEF tank is bad? Anyone have this issue. My main question I have is can I still drive it around like this and for how long if so?
  14. A


    Anyone have one yet? I know I know I know about the whole ordeal with APR and the fried ECU's. I am trying to figure out if it was the tune or the actual process of taking out/mishandling the ECU while flashing that caused these to fry. I guess what I am getting at is, with the ability to tune...
  15. A

    Twin Turbo TDI

    When is the new twin turbo 2.0 TDI coming to the US??