Recent content by Ash03

Well overdue update.. I had this setup done and dusted in 2018, forgot about this thread. On a really stingy dyno, It made 191kw 485nm. Stock ASZ Injectors. Surprisingly the car is quick against alot of other cars that Iv raced. I'm bored of it now though.. Full boost happens quite late...

Thanks bud hope all works out for the better Sent from my SM-J500F using Tapatalk

The engine is being overhauled and the bores have wear. Oversize asz pistons are only available in a cheap brand that is rubbish quality. The bhw's are almost the same price as the asz oversize pistons so the owner opted for the bhw's. The asz is pushing out 170kw at the moment, but future mods...

Ok thats for the thickness of the gasket.. I noticed on darkside website that there is a gasket for a 81mm bhw bore, im not sure if using a pd130 head gasket could cause a problem..? Sent from my SM-J500F using Tapatalk

Hey guys What exactly needs to be done for these pistons to work? I know the block has to be bored out to accept the pistons, but is there anything else? Do i have to use a bhw/bpw head gasket? Is the height of the pistons the same as the asz? Any advice will be appreciated. Sent from my...

Hey guys I would like to know from all those who have already done this, using Bhw/bpw pistons on a 1.9 ASZ pd130 block.. What exactly needs to be done for these pistons to work? I know the block has to be bored out to accept the pistons, but is there anything else? Do i have to use a bhw/bpw...

Got a friend looking for pistons, Will u ship to south africa? Sent from my SM-J500F using Tapatalk

Thanks bud.. I guess we all have to import what we like haha Sent from my SM-J500F using Tapatalk

Cool Sent from my SM-J500F using Tapatalk

Yes theu are special tools that are used to LOCK the camshaft pulley and the crank sprocket. U will either have to buy or rent a kit. The "gear" type which locks the crankshaft and the "sliding pin with a black ball on it" locks the cam shaft. There are 2 types of gear locking tools, 1 is for a...

Great knowledge there frank Sent from my SM-J500F using Tapatalk

If its a seal with a metal reinforcing, i normally just carefully screw in a self tapper a few threads and pull on the screw with a plier. Super easy, worked everytime without damage to anything. Just make sure u insert the screw straight so that it doesnt bottom out on the housing or the...

Ita quite clear how to find tdc in the instructions link. I dont mean to sound rude but What dont u understand in there? Sent from my SM-J500F using Tapatalk

i had endless crap with that pesky T fitting, i got rid of the oem style filter and went with the CAT filter and i dont regret it one bit.. Sent from my SM-J500F using Tapatalk

Thanks for the help guys Sent from my SM-J500F using Tapatalk