Hope someone can help.
A couple of years ago I bought a 1999 1.9 TDI new beetle for my daughter. The cruise control never worked in the car and resent I hooked up the VCDS to test - no response from CC arm on VCDS, but brake and clutch pedal okay. I did activate the CC before I started testing.
I purchased a new CC arm, thinking that was the problem, but it turns out that there is no wire connected to the CC arm.
Just installed wires from CC arm to the black connector, next to the ECU - pin 1,2,3 and 9. No wires on the top part of the connector so I also installed wires in that one in pin 1,2,3 and 9.
Now comes my problem!!! According to the information I can find on the WWW and in my Haynes Manual, I need to connect the wires to car ECU in pin 14, 44,45,46! Pin 14 and 44 is free, but pin 45 and 46 is already installed with wires!!!! What do I do here?? Should I just splice the wires onto the two pins, 45 and 46???
Hope someone have a idea/solution to my problem.
BR
Alex
A couple of years ago I bought a 1999 1.9 TDI new beetle for my daughter. The cruise control never worked in the car and resent I hooked up the VCDS to test - no response from CC arm on VCDS, but brake and clutch pedal okay. I did activate the CC before I started testing.
I purchased a new CC arm, thinking that was the problem, but it turns out that there is no wire connected to the CC arm.
Just installed wires from CC arm to the black connector, next to the ECU - pin 1,2,3 and 9. No wires on the top part of the connector so I also installed wires in that one in pin 1,2,3 and 9.
Now comes my problem!!! According to the information I can find on the WWW and in my Haynes Manual, I need to connect the wires to car ECU in pin 14, 44,45,46! Pin 14 and 44 is free, but pin 45 and 46 is already installed with wires!!!! What do I do here?? Should I just splice the wires onto the two pins, 45 and 46???
Hope someone have a idea/solution to my problem.
BR
Alex