VDS-PRO cable help

[Skimaster]

I have VDS-PRO up and running on an old laptop with a serial port. Bought a serial to OBDII cable from here:

KKL COM-port RS232 Serial DB9 Diagnostic cable with FT232RL for VDS Pro | eBay

You are look at a new OBD2 KKL RS232 COM diagnostic interface with genuine FT232RL chip. Applications that require a KKL cable. The KKL interface supports the following protocols ISO9141-2 / KWP 2000 / KWP 1281 / KKL mode.

www.ebay.com

When I try and connect to my 22001 or 2003 Jetta CCM, it does not find it.

Does anybody have a cable that is known to work with VDS-PRO (not VCDS) that they will sell me or know exactly where to get one? Or if someone has one, can you take a picture of the chips on the circuit board in the obdII connector so I can determine what chip I need exactly?

 

[Mozambiquer]

I have VDS-PRO up and running on an old laptop with a serial port. Bought a serial to OBDII cable from here:

KKL COM-port RS232 Serial DB9 Diagnostic cable with FT232RL for VDS Pro | eBay

You are look at a new OBD2 KKL RS232 COM diagnostic interface with genuine FT232RL chip. Applications that require a KKL cable. The KKL interface supports the following protocols ISO9141-2 / KWP 2000 / KWP 1281 / KKL mode.

www.ebay.com

When I try and connect to my 22001 or 2003 Jetta CCM, it does not find it.

Does anybody have a cable that is known to work with VDS-PRO (not VCDS) that they will sell me or know exactly where to get one? Or if someone has one, can you take a picture of the chips on the circuit board in the obdII connector so I can determine what chip I need exactly?

Not sure if it'll work with vds pro, but the older unlimited VIN Ross-tech cables have a option to use as a pass through using a driver available from Ross tech. There's into on this thread: Vag-tacho vds-pro

 

[gmenounos]

I'd recommend using my program instead of VDS-PRO (unless all you have is a really old laptop that can only run DOS). I've been able to read/write the CCM using both a genuine VCDS cable as well as this: https://www.amazon.com/gp/product/B00K6498D0

 

[Mozambiquer]

I also recommend Greg's program. I haven't used it for ccm yet, but I've read the skc on several cars already.