2011 170bhp tdi into caddy

smartuki · March 26th, 2012, 04:30

im going to be starting a convertion in the next week or so .
im putting a 2011 golf tdi 170 into a 07 caddy, compleat with 6speed box big brakes front and rear
the start

smartuki · March 26th, 2012, 04:47

i have the full car loom from the donor car with all ecu's ecm's. i was hoping to get the engine ecu decoded , i would of run it with just the engine ecu , but no body can do the comon rail diesel ecu yet .
so i have to remove all the front loom from the mk5 loom ,an run the clocks etc for code on key etc.
anyone know of another way easyer to run it ??.

smartuki · April 5th, 2012, 15:57

and in it pops

JFettig · April 6th, 2012, 04:36

Don't skimp on the details, we're all watching intently

cmrn · April 6th, 2012, 20:09

Vcds can do a lot for your ecu. Conyact Malone tuning and rosstech for the rest. Good luck

smartuki · April 7th, 2012, 15:27

rite so its all in , thought id get it running on the full loom befor choping it about .
i have crank etc but no prime or fuel pumps , the only part i do not have is the steering wheel control module .
is that the problem ??

cmrn · April 8th, 2012, 19:31

Anything can be worked aeound

ryanp · April 9th, 2012, 09:31

sounds like a nice project, I think it might be a struggle to get it to run with the stock wiring, would need to intergrate everything into the Caddy to have a chance, please keep us up to date!!!

smartuki · April 9th, 2012, 15:23

Quote:

Originally Posted by ryanp

sounds like a nice project, I think it might be a struggle to get it to run with the stock wiring, would need to intergrate everything into the Caddy to have a chance, please keep us up to date!!!

im going to run the engine with full rocco loom then once i know its running i will intergrate the two , from pritty much the dash forward it will be rocco in the end .

smartuki · April 9th, 2012, 15:25

the job for today was dpf delete an remap, may as well get ready for it running

ryanp · April 9th, 2012, 15:27

Cant wait to see it done, i bloody hate wiring! The BKD into my Caddy on a 1.9 wiring loom was enough for me haha!

It will be rude not to put a big blower on there once its running!

cmrn · April 11th, 2012, 21:12

....I thought you were talking about an old school caddy. My b

ryanp · April 29th, 2012, 03:31

Any more updates on this?

smartuki · April 29th, 2012, 14:57

so its now running an im back on track , in the last two days i have riped out the old loom an spent a bit of time messing about .
i have fitted the heater box , an got the dash back in . so now i have the folowing toys . duel heater controls , heated seats ,auto head lights, fog lights,auto dimming rear view mirror,an a full head up display.

hears what i started with

smartuki · April 29th, 2012, 15:00

just need to make a front plate to make it tidy, but think the heater looks trick .