mtbe
Member
- Joined
- Oct 27, 2010
- Location
- Finland
- TDI
- golf IV V6 ( R32 swap) 4motion, Bora variant TDI 4motion ARL
Hi to all!
Firstly i want to thank Graeme helping me out to make mods on my car.
I just installed folding mirrors, 1c0 window motors, siren, interior monitor, 1j0 920 846F. Now i have some wiring issues with new CCM. My car doesnt start. It spins the starter very well, but that it is all. Can anyone help? CCM is from R32 mk4 year 2003, windowmotors 1C0959802C and 1C0959801B are from seat leon 1M, car is 2000 golf iv V6 4motion.
1j0 pin (wiring)-->1c0 pin (wiring)
T23:
1 sw/br heated rear window T7/3--->16 sw/br heated rear window T7/3
2 br/sw A126+K116 T32/16---->-
3 ge/ro 86S+J286 T32/30---->T23/17-->D86S
4 br/gn T5d/5+T3b/1+T2c/1--->13 br/gn T5d/5+T3d/1+T5o/5
5 sw/li S6 fuse--> -
6 or/br B230 lowBUS-->6 or/br B230 lowCAN
7 ge/sw T4a/2+T6F/2 --->12 ge/sw T4a/2+T6F/2
8 br/ge J285 T32/21 A13---->1 br/ge J285 T32/21 A13
9 or/gn B229 highBUS--->9 or/gn B229 highCAN
10 ro/br T4a/3+T6F/3--> 8 ro/br T4a/3+T6F/3
11 gr/ws K-->11 gr/ws K
12 gr/bl ?-->14 gr/bl
13 br/li 4/86 rear lid remote relay--->-
14 bl/ws signal speed A27+J285 T32/3--->-
15 br/sw T5/4--->10 br/sw A126+ K166 T32/16 seems ok or T23/2
16 bl/gr T8e/1---->21 bl/gr T8e/1
17 li/ws A125+J234 T75/72---->T23/19-->T75/72 (lilac/white)
18 ro/bl connection interior light---->20 ro/bl A29+ T8e/6+ Seems same?
19 gn T5d/2+T5o/2---->3 gn T5d/2
20 bl T5d/4---->18 ro/bl T5d/1+ T5d/4
21 gn/br T5d/3+A49+T10i/9---->2 gn/br T5d/3 + T10i/9 (1j0 didnt have it)
22 ro/sw S14---->22 ro/sw S14
23 br ground---->23 br ground
Wires and pins (1c0) that i didnt use:
Pin7 br/bl Q44+T5/3
Pin2 gn/br T5d/3+T10i/9
Pin 4,5,15.
Wires on loose:
1.Blue/white was on T23/14 speed signal (use CAN now)
2.black/lilac was T23/5->S6
Cluster shows all door symbols right (i have added can H&L wires to ccm to cluster)
T15
1 br/ro T2d/2+F266--->5 br/ro B161+T2d/2+J285 T32a/22
? --->2 bl/ro T8e/4
? --->3 sw/ge H12 (siren) T3/1
7 HF R47--->7 HF R47
10 HF R47--->10 HF R47
11 sw/ge (H8)---->11 sw/ge (H8)
12--->12 ro/ge S111
13--->14
14--->15
15--->13
siren:
old pin 2 to pin1--->T15/11 toT15/3
old pin 1->pin2 (ground),
pin3 ->T15/12.
Interior monitor:
T8e/3->T15/9+T4a/1
T8e/4->T15/2
T8e/5->fuse S12
Deactivation switch
T4a/1->T15/9
T4a/3->T23/20+T8e/6
T4a/4-->T23/21+T8e/1
I read this topic:
http://forums.tdiclub.com/showthread.php?t=183577
And do i really need to change my climatronic to different version? Are wirings
If i looked wirings pin 17 and 19 should be empty?
Thanks!
Firstly i want to thank Graeme helping me out to make mods on my car.
I just installed folding mirrors, 1c0 window motors, siren, interior monitor, 1j0 920 846F. Now i have some wiring issues with new CCM. My car doesnt start. It spins the starter very well, but that it is all. Can anyone help? CCM is from R32 mk4 year 2003, windowmotors 1C0959802C and 1C0959801B are from seat leon 1M, car is 2000 golf iv V6 4motion.
1j0 pin (wiring)-->1c0 pin (wiring)
T23:
1 sw/br heated rear window T7/3--->16 sw/br heated rear window T7/3
2 br/sw A126+K116 T32/16---->-
3 ge/ro 86S+J286 T32/30---->T23/17-->D86S
4 br/gn T5d/5+T3b/1+T2c/1--->13 br/gn T5d/5+T3d/1+T5o/5
5 sw/li S6 fuse--> -
6 or/br B230 lowBUS-->6 or/br B230 lowCAN
7 ge/sw T4a/2+T6F/2 --->12 ge/sw T4a/2+T6F/2
8 br/ge J285 T32/21 A13---->1 br/ge J285 T32/21 A13
9 or/gn B229 highBUS--->9 or/gn B229 highCAN
10 ro/br T4a/3+T6F/3--> 8 ro/br T4a/3+T6F/3
11 gr/ws K-->11 gr/ws K
12 gr/bl ?-->14 gr/bl
13 br/li 4/86 rear lid remote relay--->-
14 bl/ws signal speed A27+J285 T32/3--->-
15 br/sw T5/4--->10 br/sw A126+ K166 T32/16 seems ok or T23/2
16 bl/gr T8e/1---->21 bl/gr T8e/1
17 li/ws A125+J234 T75/72---->T23/19-->T75/72 (lilac/white)
18 ro/bl connection interior light---->20 ro/bl A29+ T8e/6+ Seems same?
19 gn T5d/2+T5o/2---->3 gn T5d/2
20 bl T5d/4---->18 ro/bl T5d/1+ T5d/4
21 gn/br T5d/3+A49+T10i/9---->2 gn/br T5d/3 + T10i/9 (1j0 didnt have it)
22 ro/sw S14---->22 ro/sw S14
23 br ground---->23 br ground
Wires and pins (1c0) that i didnt use:
Pin7 br/bl Q44+T5/3
Pin2 gn/br T5d/3+T10i/9
Pin 4,5,15.
Wires on loose:
1.Blue/white was on T23/14 speed signal (use CAN now)
2.black/lilac was T23/5->S6
Cluster shows all door symbols right (i have added can H&L wires to ccm to cluster)
T15
1 br/ro T2d/2+F266--->5 br/ro B161+T2d/2+J285 T32a/22
? --->2 bl/ro T8e/4
? --->3 sw/ge H12 (siren) T3/1
7 HF R47--->7 HF R47
10 HF R47--->10 HF R47
11 sw/ge (H8)---->11 sw/ge (H8)
12--->12 ro/ge S111
13--->14
14--->15
15--->13
siren:
old pin 2 to pin1--->T15/11 toT15/3
old pin 1->pin2 (ground),
pin3 ->T15/12.
Interior monitor:
T8e/3->T15/9+T4a/1
T8e/4->T15/2
T8e/5->fuse S12
Deactivation switch
T4a/1->T15/9
T4a/3->T23/20+T8e/6
T4a/4-->T23/21+T8e/1
I read this topic:
http://forums.tdiclub.com/showthread.php?t=183577
And do i really need to change my climatronic to different version? Are wirings
If i looked wirings pin 17 and 19 should be empty?
Thanks!
Last edited: