GT2560BB Turbo Kit for Mk3 Golf 1.9 TDI - Turbo, Tubular Manifold, Downpipe, FMIC etc

ryanp · February 22nd, 2011, 06:22

Hi,
The time has come for me to sell my Mental Mk3 TDI Turbo Setup. I have decided that I should practise what I preach and I am fitting one of my GTB2260VK Turbo Kits to the Mk2 instead of this.

Here are the juicy details:
Turbo - GT2560BB - Ball Bearing and Watercooled
Turbine: 53mm inducer, 62 trim, .64 A/R
Compressor: 46.5mm inducer, 60mm exducer, 60trim, 0.60 A/R

The turbo has only covered 1500 miles from new:

Mk3 Engine Bay:

Tubular Exhaust Manifold (Built by Russ Fellows) - Sits Turbo over Gearbox
2.75" Downpipe
Custom Huge plenum Inlet manifold
2" Intercooler Pipes (Mandrel SS and silicone couplings)
Huge FMIC Intercooler
Braided Oil Feed and Return lines
All watercooling pipes and secondary pump

This is a dyno printout on the previous non-Hybrid/Ball Bearing T25:

With the New BB Turbo, at 2.2 bar of boost I got wheel spin well over 70mph on the road.

This is basically a complete setup to bolt onto a Mk3 Golf 1.9 TDI. I was going to modify the boost pipes to use in my MK2 Golf, but I have had a change of plan.

I am looking for around £1200for this kit. Bearing in mind the turbo was £1000 on its own only 1500 Miles ago. Also, Russ Fellows manifolds are stupidly expensive. He builds crazy racecars for a living:
http://www.youtube.com/watch?v=uwrgFxkIbPI

I can ship this kit anywhere in the world. I would estimate £120 for shipping to the USA/Canada.

If you need any more information on the kit, please post here so everyone can see.

Thanks!

Ryan

ryanp · February 22nd, 2011, 07:47

Quote:

Originally Posted by coronan

Sweet Setup?
What did you use to fuel it?

Sorry, forgot to add, This was fueled by an 11mm pump with 12mm head (cummins 4bt?) and Race 520 injectors with a 7psi Lift pump. The turbo has more to give than the fuelling, somewhere around 300hp can be acheived on diesel only using larger (Nicktane) nozzles.

It flat out ripped and would keep with some serious cars but i need to use the producs i sell so it has to go! Full boost was below 3000rpm and the fuel cut was just below 6000. It still pulls past 140mph on the autobahn.

ryanp · March 1st, 2011, 00:10

Still here!

ryanp · March 7th, 2011, 12:22

I'll do £1200 shipped to the US/Canada, it's a shame to see this wasting away here!

Thanks

Ryan

ryanp · March 10th, 2011, 01:57

Bump! i really dont want to offer this on Ebay UK!!!!

yatzee · March 11th, 2011, 05:38

just and FYI - the MK3 cars on this side of the pond aren't doing very well rust-wise, so I think people are hesistating due to that. My 96 AAZ's floor was nearly gone by 2002....

There are some cleans ones over here....

ryanp · March 11th, 2011, 08:10

Yeah they were bad over here from 94-96 due to cheap steel but the 97/98 models were much better! There are still a few Mk3 Golf / Jetta / B4 Passat that people want to go crazy with so i'm sure it will go at some point!

I'll put it on ebay UK next week and put up with the stupid questions! lol

Thanks

Ry

mrvermin · March 11th, 2011, 17:42

This would be great for my next door neighbor's '97 Mk3 Jetta TDI.

Too bad he is 78 years old and this is waayy out of his league

Good luck with the sale though

MrVermin

ryanp · March 12th, 2011, 10:52

Quote:

Originally Posted by mrvermin

This would be great for my next door neighbor's '97 Mk3 Jetta TDI.

Too bad he is 78 years old and this is waayy out of his league

Good luck with the sale though

MrVermin

Did you ask if it was out of his leauge? some of those old guys are speed freaks behind the scenes! haha

I cant wait to see this on another car and not wasting away in a box in the workshop!

ryanp · March 18th, 2011, 06:56

This is now unfortunately on eBay. I need it out of the way as it is taking up valuable space:

http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=320672823973

I am willing to listen to sensible offers on this, Ebay fees are almost 10% so i can take off that much at least!

Thanks!

ryanp · April 19th, 2011, 06:07

This didn't sell on eBay. I am willing to listen to any offers on this, just want it out of the way and bolted up to a mental TDI, where it should be!

Cheers

Ry

foxracer1 · April 19th, 2011, 15:50

I'm kinda interested in the just turbo and intake manifold. Willing to seperate?

ryanp · April 20th, 2011, 01:27

Hi,

Yes I can seperate no problem, make me an offer!

Thanks

Ryan

bostongsx · April 20th, 2011, 05:41

I am interested in this complete, its a long shot but any idea how this would fit in a mk2 with an ahu swap? Also whats the price in us dollars and do you accept paypal.
Thanks
Herb

ryanp · April 20th, 2011, 05:46

I've had it fitted into my Mk2 Engine bay, everything fits but the Intercooler Pipes needed modifying, it wouldn't be expensive to sort them.

The price (£1000 + £120 Shipping) works out at $1850 US inc Shipping, but I am open to offers.

Cheers!

Ryan