5-speed EGR to 6-speed ERR

I just installed 6speed from a 5speed , no reverse lights, cruise control , or speedo , ive ordered new sensors hope that takes care of them problems any help will be greatly appreciated.. ? I have is atm gps 80mph the 6speed seems to be running at a higher rpm than my 5speed ??

5 speed auto scan

Friday,25,August,2017,15:14:55:29194
VCDS -- Windows Based VAG/VAS Emulator Running on Windows 7 x64
VCDS Version: 17.8.0.1 HEX-V2 CB: 0.4401.4
Data version: 20170721 DS276.2
www.Ross-Tech.com

VIN: 9BWGP61J224057824 License Plate: MATT2002GOLF
Mileage: 466510km-289875mi Repair Order:

--------------------------------------------------------------------------------
--------------------------------------------------------------------------------

Chassis Type: 1J (1J - VW Golf/Bora IV (1998 > 2006))
Scan: 01 02 03 08 15 16 17 19 22 29 35 36 37 39 46 47 55 56 57 75
76

VIN: 9BWGP61J224057824 Mileage: 466510km-289875miles
-------------------------------------------------------------------------------
Address 03: ABS Brakes Labels: 1C0-907-37x-ABS.lbl
Part No: 1C0 907 379 J
Component: ABS FRONT MK60 0103
Coding: 0004097
Shop #: WSC 00000 785 00200
VCID: 313C1D760D3E7A2FE44-5184
No fault code found.
-------------------------------------------------------------------------------
Address 15: Airbags Labels: 6Q0-909-605-VW5.lbl
Part No: 1C0 909 605 F
Component: 08 AIRBAG VW61 0202 0001
Coding: 12344
Shop #: WSC 00000
VCID: 2708F32E36FA349F3A0-5160
No fault code found.
-------------------------------------------------------------------------------
Address 17: Instruments Labels: 1J0-920-xx5-17.lbl
Part No: 1J0 920 906 M
Component: KOMBI+WEGFAHRSP VDO V07
Coding: 07232
Shop #: WSC 03164
VCID: 323E127A0D3841379DE-513C
9BWGP61J224057824 VWZ7Z0A4435334
2 Faults Found:
01176 - Key
07-10 - Signal too Low - Intermittent
01315 - Transmission Control Module
49-00 - No Communications
-------------------------------------------------------------------------------
Address 19: CAN Gateway Labels: 6N0-909-901-19.lbl
Part No: 6N0 909 901
Component: Gateway K<->CAN 0001
Coding: 00006
Shop #: WSC 00000
VCID: 70BAD872C3B43327ABA-5160
1 Fault Found:
01315 - Transmission Control Module
49-00 - No Communications
-------------------------------------------------------------------------------
Address 46: Central Conv. Labels: 1C0-959-799.lbl
Part No: 1C0 959 799 C
Component: 1Q Komfortgerát HLO 0003
Coding: 00258
Shop #: WSC 00000
VCID: 3728236EE65AA41FAA0-4B1E
Subsystem 1 - Part No: 1C1959801A
Component: 1Q Tõrsteuer.FS KLO 0002
Subsystem 2 - Part No: 1C1959802A
Component: 1Q Tõrsteuer.BF KLO 0002
Subsystem 3 - Part No: 1C0959811A
Component: 1Q Tõrsteuer.HL KLO 0002
Subsystem 4 - Part No: 1C0959812A
Component: 1Q Tõrsteuer.HR KLO 0002
No fault code found.
-------------------------------------------------------------------------------
Address 56: Radio Labels: 3B7-035-1xx-56.lbl
Part No: 3B7 035 180
Component: Radio NP2 0055
Coding: 00401
Shop #: WSC 00000
VCID: 5DE491C62426AE4F10C-5160
2 Faults Found:
00881 - Connection to Speaker Rear Right
44-10 - Short Circuit - Intermittent
01305 - Databus for Infotainment
37-10 - Faulty - Intermittent
End----------(Elapsed Time: 05:42, VBatt start/end: 12.2V/12.1V)-----------

6speed auto scan
Wednesday,20,September,2017,21:36:09:29194
VCDS -- Windows Based VAG/VAS Emulator Running on Windows 7 x64
VCDS Version: 17.8.0.1 HEX-V2 CB: 0.4401.4
Data version: 20170721 DS276.2
www.Ross-Tech.com

VIN: 9BWGP61J224057824 License Plate: NEW TRANS
Mileage: 469620km-291808mi Repair Order:

--------------------------------------------------------------------------------
--------------------------------------------------------------------------------

Chassis Type: 1J (1J - VW Golf/Bora IV (1998 > 2006))
Scan: 01 02 03 08 15 16 17 19 22 29 35 36 37 39 46 47 55 56 57 75
76

VIN: 9BWGP61J224057824 Mileage: 469620km-291808miles
-------------------------------------------------------------------------------
Address 01: Engine Labels: 038-906-012-AGR.clb
Part No: 038 906 012 FD
Component: RC2Jb EDC SG760 4102 2
Coding: 00002
Shop #: WSC 00000
VCID: 57E883EE461A441F4A0-4B1E
9BWGP61J224057824 VWZ7Z0A4435334
2 Faults Found:
17978 - Engine Start Blocked by Immobilizer
P1570 - 35-00 -
16885 - Vehicle Speed Sensor
P0501 - 35-00 - Implausible Signal
Readiness: 0 0 0 0 0
-------------------------------------------------------------------------------
Address 03: ABS Brakes Labels: 1C0-907-37x-ABS.lbl
Part No: 1C0 907 379 J
Component: ABS FRONT MK60 0103
Coding: 0004097
Shop #: WSC 00000 785 00200
VCID: 313C1D760D3E7A2FE44-5184
2 Faults Found:
00285 - ABS Wheel Speed Sensor; Front Right (G45)
012 - Electrical Fault in Circuit - Intermittent
00283 - ABS Wheel Speed Sensor; Front Left (G47)
012 - Electrical Fault in Circuit
-------------------------------------------------------------------------------
Address 15: Airbags Labels: 6Q0-909-605-VW5.lbl
Part No: 1C0 909 605 F
Component: 08 AIRBAG VW61 0202 0001
Coding: 12344
Shop #: WSC 00000
VCID: 2708F32E36FA349F3A0-513C
No fault code found.
-------------------------------------------------------------------------------
Address 17: Instruments Labels: 1J0-920-xx5-17.lbl
Part No: 1J0 920 906 M
Component: KOMBI+WEGFAHRSP VDO V07
Coding: 07232
Shop #: WSC 03164
VCID: 323E127A0D3841379DE-513C
9BWGP61J224057824 VWZ7Z0A4435334
3 Faults Found:
01176 - Key
07-10 - Signal too Low - Intermittent
01314 - Engine Control Module
49-10 - No Communications - Intermittent
01315 - Transmission Control Module
49-00 - No Communications
-------------------------------------------------------------------------------
Address 19: CAN Gateway Labels: 6N0-909-901-19.lbl
Part No: 6N0 909 901
Component: Gateway K<->CAN 0001
Coding: 00006
Shop #: WSC 00000
VCID: 70BAD872C3B43327ABA-513C
2 Faults Found:
01314 - Engine Control Module
49-10 - No Communications - Intermittent
01315 - Transmission Control Module
49-00 - No Communications
-------------------------------------------------------------------------------
Address 46: Central Conv. Labels: 1C0-959-799.lbl
Part No: 1C0 959 799 C
Component: 1Q Komfortgerát HLO 0003
Coding: 00258
Shop #: WSC 00000
VCID: 3728236EE65AA41FAA0-4B1E
Subsystem 1 - Part No: 1C1959801A
Component: 1Q Tõrsteuer.FS KLO 0002
Subsystem 2 - Part No: 1C1959802A
Component: 1Q Tõrsteuer.BF KLO 0002
Subsystem 3 - Part No: 1C0959811A
Component: 1Q Tõrsteuer.HL KLO 0002
Subsystem 4 - Part No: 1C0959812A
Component: 1Q Tõrsteuer.HR KLO 0002
No fault code found.
-------------------------------------------------------------------------------
Address 56: Radio Labels: 3B7-035-1xx-56.lbl
Part No: 3B7 035 180
Component: Radio NP2 0055
Coding: 00401
Shop #: WSC 00000
VCID: 5DE491C62426AE4F10C-513C
1 Fault Found:
01305 - Databus for Infotainment
37-10 - Faulty - Intermittent
End----------(Elapsed Time: 04:57, VBatt start/end: 13.2V/13.3V)-----------

thanks for any help
matt 2002 golf tdi

Apone said:

I just installed 6speed from a 5speed , no reverse lights, cruise control , or speedo , ive ordered new sensors hope that takes care of them problems any help will be greatly appreciated.. ? I have is atm gps 80mph the 6speed seems to be running at a higher rpm than my 5speed ??

Click to expand...

Is the O2M-ERR a diesel transmission?

Edit: Check this...

http://forums.tdiclub.com/showthread.php?t=319371

yes it was out of a 2003 1.8t car, end gearing ratio should be higher w R&P difference
http://www.zelek.com/diagram_charts/diagramlist.htm

All that work to put the wrong transmission in....

yep wish I did some more research on the 02m before I spent weekend installing it looks like back to the 02j

http://www.engineersedge.com/mechanics_machines/transmission-gear-ratio-calculator.htm

no crap but I bet it wont take as long to switch it back

anyone know where I can order a ring and pinion set for this 02m ill just make it work

Apone said:

anyone know where I can order a ring and pinion set for this 02m ill just make it work

Click to expand...

It's not just one pinion gear...

Gears 1-4 are on one shaft with a shorter pinion.

Gears 5-6 are on a different one with a taller pinion.

Both mesh with the same ring gear...

Generally the shafts themselves are one piece with the pinions, so you'd have to press off all the synchro hubs/selectors and various sleeves, then press them onto the new, correct shafts...

Might as well buy the right used transmission to start with.

JDSwan87 said:

All that work to put the wrong transmission in....

Click to expand...

Real men of genius "Mr. put the transmission in and I don't have the correct ratios man". I had a plan............

Without mistakes, we wouldn't learn anything, now would we? By the time Apone is done, he will probably have Guru level knowledge on this stuff.

Ol'Rattler said:

Real men of genius "Mr. put the transmission in and I don't have the correct ratios man". I had a plan............
Without mistakes, we wouldn't learn anything, now would we? By the time Apone is done, he will probably have Guru level knowledge on this stuff.

Click to expand...

Exactly.

Yeah, I just had a learning experience with lining up a transmission for bolting up to the engine. I didn't have a problem with this process, it's that I had to do it THREE times because the first time I forgot to install the clutch fork! Second time I found that one of the plate's ears, that goes around one of the alignment dowels, had managed to fold itself over (no clue as to how this happened; would never have gotten the trans and engine seated together fully). And, the third time was a charm! Thank goodness I had a good arrangement for handling the transmission (by myself). Without a doubt, next time I do any of this work I won't be making these mistakes again!

But, for the OP, this is really a painful lesson.