Injector/Nozzle upgrade for 2.0 tdi 170PD
- Thread starter Steveley_225
- Start date
ryanp
Vendor
- Joined
- Jun 22, 2008
- Location
- Barnsley, South Yorkshire, UK
- TDI
- Arosa CR - 550hp - 9.7 @ 150mph 1/4 Mile, Citigo 4x4 CR TDi - 340hp, Caddy 2.0 CR 4x4 TDI - 300+hp, Golf Mk2 Van 1.9 TDI - was 290hp, Mk5 Ibiza 2.0 FR TDi - 270hp, BMW 135d - 360hp, BMW 330d - 335hp, BMW 335d - 380hp + a few more ........
What duration is that? We had like 44 with the same spec and 260-270hp without the Meth on our VRS, only 255 on an Altea with the same spec
I have some + 50% injectors here to test but no time!
I have some + 50% injectors here to test but no time!
let me tune the Altea for you
Hello Guys
Mohammed you still have DPF on board or you delete it already with this Power ???
I still looking Guys with experience with DPF what the max Power for ppd170 bmn Engine ?
I am Planning Projekt if its possible for make 240-250 power with dpf
change nozzles for shorter timing to reduce temp and change turbo GTB2056 or 2260
Is that possible ?? to make this power with DPF have someone try this ?
LG mornie
Mohammed you still have DPF on board or you delete it already with this Power ???
I still looking Guys with experience with DPF what the max Power for ppd170 bmn Engine ?
I am Planning Projekt if its possible for make 240-250 power with dpf
change nozzles for shorter timing to reduce temp and change turbo GTB2056 or 2260
Is that possible ?? to make this power with DPF have someone try this ?
LG mornie
b5converison
Veteran Member
- Joined
- Apr 4, 2010
- Location
- london
- TDI
- Audi A4 S , 2.0 PD 16v, 2060VKLR 280bhp & 550nm conservative ..
you need dpf off mate and different (bigger) exhaust for that power ..
Tirion
Member
Hi, raise the topic. Are there race1287 nozzles for PPD 170 for sale and what is the maximum power with them on a standard turbine?
Tirion
Member
What is the maximum power reached at the stock injectors of the BMN engine?
Tirion
Member
260 hp on the gt2260 turbine?
Tirion
Member
Do you mean injectors from the engine of the BKD? Need to buy ECU, injectors and turbine, what is the price of such alterations?)
Tirion
Member
what is better 260 hp and replacing turbiya or 300 hp and replacing half the car?))
On my experience, i had many problems with PPD, so i would like to had bosch from beginning. Problem is that you use so much duration in PPD to get over 250hp. With that you get high cilinder pressures and egt. That all contribute to crack head and destroy turbo. And plus all of that, there is no way to test and fix faulty injector. And they are very expensive new.
Tirion
Member
What is the potential of the next generation engine? CEGA CR
Last edited:
Tirion
Member
what do you need for converting to bosh, as I understand it, it is an ecu, wires for injectors and injectors 140PPD?
Tirion
Member
Yes, I meant it))))
What is the power of this config on the 140pd stock injectors installed in the bmn engine?
Last edited: