my problem trans no revers and forward please advice

my passat b5.5 Tdi(avf) had probleam in trans (01v) now can't forward (D) and revers (R) . but can move forward and revers in idel speed. now I'm chang new fuid + filter. and use vag com monitor at follow
1. code p730
2. all solenoid ohm ok
3. block 007 and block 5 if N215 0.648amp not forward and revers, and if N215 0.248amp Clutch action in idel speed (800rpm) but put accelerator (up 800rpm) N215 chang 0.648amp. not move
4. gear D2 (1m) OK (D,D4,D3 slip)
5. i'm check disconnect to Tcm (limp mode) R ok
please advice next procedure .....

boomneverdies said:

my passat b5.5 Tdi(avf) had probleam in trans (01v) now can't forward (D) and revers (R) . but can move forward and revers in idel speed. now I'm chang new fuid + filter. and use vag com monitor at follow
1. code p730
2. all solenoid ohm ok
3. block 007 and block 5 if N215 0.648amp not forward and revers, and if N215 0.248amp Clutch action in idel speed (800rpm) but put accelerator (up 800rpm) N215 chang 0.648amp. not move
4. gear D2 (1m) OK (D,D4,D3 slip)
5. i'm check disconnect to Tcm (limp mode) R ok
please advice next procedure .....

Click to expand...

Replace the transmission.

Even if the TCM is dead, unplugged, whatever, the car will still be able to move, as the hydraulics and mechanicals will still work in the limp mode. So if it won't move at all, it's dead. Jim.

Unless an axle is broken or something, but if the TCM has a DTC, then that is not it.