06 jetta tdi

fluxcore

Veteran Member
Joined
May 3, 2013
Location
ma.
TDI
06 jetta tdi
it camshaft sensor i lost it , but the plug was on 2 pins. it D shares' the engine off, the top pin volts were 16.8 and bottom was 8.2 volts. the systems volts was 12 volts. i need a 3 pin sensor. tomorrow I explore in trunk line for power, ground and emc line to connect to then align engine, i can pin harmonic balance and slotted cover holes but it won't pin to the brm block. dodge make a diesel?
Thanks
 

Lightflyer1

Top Post Dawg
Joined
Sep 13, 2005
Location
Round Rock, Texas
TDI
2015 Beetle tdi dsg
Align what D Pin sometimes with the backwards socket only when connected. Then pin the trunk line harmonic with an sensor what is ground and emc. Move the cover slotted backwards over brm and tomorrow explore a dodge diesel camshaft. Simple!

Good luck!

No one can help if you can't even put a logical sentence together.
 

Tdijarhead

Top Post Dawg
Joined
Nov 10, 2013
Location
Lawrenceville PA
TDI
2003 TDI Jetta Daughters Car, 2001 TDI Beetle, Wife’s car, 2005 Golf TDI Mine, all 5 spds
You should probably proof read what you type.
 
Top