redbarron55
Veteran Member
I bit the bullet and installed the firmware and maps in my 2012 TDI Exec RNS 850 yesterday.
I hooked up a battery charger to keep the battery up and the only problem I has was it started raining and I was using a charger/maintainer that would let the voltage get higher than I wanted after the battery was charged.
After the update I did a VCDS auto scan and found a few problems.
A couple of the modules recorded a high voltage fault, but they recovered when cleared.
The Infotainment.
Here is the scan of that module:
Tuesday,20,August,2019,16:44:29:25118
VCDS -- Windows Based VAG/VAS Emulator Running on Windows 10 x64
VCDS Version: 19.6.1.0 (x64) HEX-V2 CB: 0.4508.4
Data version: 20190529 DS308.0
www.Ross-Tech.com
VIN: WVGFK9BP6CD001603 License Plate: CONNIE1
Mileage: 99956 Repair Order: 006
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Address 5F: Information Electr. Labels: 4E0-035-6xx-5F.clb
Control Module Part Number: 7P6 035 664 D HW: 7P6 035 664
Component and/or Version: H-BN-NA H44 0706
Software Coding: 020200050040E1EF41022B0E00000003F00001010000000000
Work Shop Code: WSC 31414 790 00001
VCID: 392F2D76195FB32FCD7-806C
3 Faults Found:
03276 - Please Check Software Version Management
000 - -
Freeze Frame:
Fault Status: 01100000
Fault Priority: 6
Fault Frequency: 1
Reset counter: 88
Mileage: 160868 km
Time Indication: 0
Date: 2019.08.20
Time: 16:40:11
Freeze Frame:
Text: DUA001,Front,M,0,0,6
03175 - Invalid Data Set
000 - -
Freeze Frame:
Fault Status: 01100000
Fault Priority: 2
Fault Frequency: 1
Reset counter: 88
Mileage: 160868 km
Time Indication: 0
Date: 2019.08.20
Time: 16:40:09
Freeze Frame:
Voltage: 14.00 V
03623 - Invalid Security/Release Code
000 - -
Freeze Frame:
Fault Status: 01100000
Fault Priority: 6
Fault Frequency: 1
Reset counter: 88
Mileage: 160868 km
Time Indication: 0
Date: 2019.08.20
Time: 16:40:10
Freeze Frame:
Hex Value: 0x0004
Hex Value: 0x0009
Count: 7
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Address 5F: DTCs cleared
I assume that this has to do with the cracked authorization code etc.
Does anyone know how to clear this or is it best to just leave it and enjoy the maps?
I assume that everything will just keep on working.
I hooked up a battery charger to keep the battery up and the only problem I has was it started raining and I was using a charger/maintainer that would let the voltage get higher than I wanted after the battery was charged.
After the update I did a VCDS auto scan and found a few problems.
A couple of the modules recorded a high voltage fault, but they recovered when cleared.
The Infotainment.
Here is the scan of that module:
Tuesday,20,August,2019,16:44:29:25118
VCDS -- Windows Based VAG/VAS Emulator Running on Windows 10 x64
VCDS Version: 19.6.1.0 (x64) HEX-V2 CB: 0.4508.4
Data version: 20190529 DS308.0
www.Ross-Tech.com
VIN: WVGFK9BP6CD001603 License Plate: CONNIE1
Mileage: 99956 Repair Order: 006
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Address 5F: Information Electr. Labels: 4E0-035-6xx-5F.clb
Control Module Part Number: 7P6 035 664 D HW: 7P6 035 664
Component and/or Version: H-BN-NA H44 0706
Software Coding: 020200050040E1EF41022B0E00000003F00001010000000000
Work Shop Code: WSC 31414 790 00001
VCID: 392F2D76195FB32FCD7-806C
3 Faults Found:
03276 - Please Check Software Version Management
000 - -
Freeze Frame:
Fault Status: 01100000
Fault Priority: 6
Fault Frequency: 1
Reset counter: 88
Mileage: 160868 km
Time Indication: 0
Date: 2019.08.20
Time: 16:40:11
Freeze Frame:
Text: DUA001,Front,M,0,0,6
03175 - Invalid Data Set
000 - -
Freeze Frame:
Fault Status: 01100000
Fault Priority: 2
Fault Frequency: 1
Reset counter: 88
Mileage: 160868 km
Time Indication: 0
Date: 2019.08.20
Time: 16:40:09
Freeze Frame:
Voltage: 14.00 V
03623 - Invalid Security/Release Code
000 - -
Freeze Frame:
Fault Status: 01100000
Fault Priority: 6
Fault Frequency: 1
Reset counter: 88
Mileage: 160868 km
Time Indication: 0
Date: 2019.08.20
Time: 16:40:10
Freeze Frame:
Hex Value: 0x0004
Hex Value: 0x0009
Count: 7
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Address 5F: DTCs cleared
I assume that this has to do with the cracked authorization code etc.
Does anyone know how to clear this or is it best to just leave it and enjoy the maps?
I assume that everything will just keep on working.