?? Engine mount bracket to engine block bolt torque setting??

I am in the middle of doing a TB on my Jetta and I have a question on the torque for the 3 bolts that hold the engine mount bracket to the engine block. I did a search, I know this has been answered before but I can't find it. In the Bentley manual, in 3 different sections, it says to torque the bolts to 33 ft-lbs. In the Club TB change procedure it says 44 ft-lbs + 1/4 turn. I know these settings are important, but that is a big discrepancy and was wondering which is correct.
TIA

The 3 get torqued to 33. The two large vertical are 74 (updated spec) and the two smaller are 30+90.

greengeeker said:

The 3 get torqued to 33. The two large vertical are 74 (updated spec) and the two smaller are 30+90.

Click to expand...

Thank you,
So to clarify for my simple tired confused mind.. the Mount to engine bracket bolt that was 44 ft-lbs + 1/4 turn is now just 74 ft-lbs with no additional turns? The others are unchanged from what is in the Bentley manual.

You got it.