Transmission bolts

When I was bolting in the subframe I noticed that it appears I am missing some bellhousing bolts, from the oil pan to the bellhousing. What bolts fit the manual trans in the passat? I was looking at the kit from idparts for the 02J transmission. Part #N91031702


Or will the auto bellhousing bolts work?

If you can take a picture I can better tell you what you are missing.

The bolts that go through the oil pan into the transmission on the bottom are N-906-483-03, they are M10x45x32 (10x1.50 thread, 45mm long, with a 32mm shoulder).

Then there is an Allen bolt, coming in from the transmission side through the oil pan and secured with a nut. N-102-382-04 and N-102-613-04, respectively.

That is for the automatics... not sure if the manuals are the same, been a while since I had one of those out.

Thanks for the info, got some ordered up and will see if they fit

The bolts that oilhammer suggested worked good in my application

Awesome, thanks for posting back!

Finally put it on the hoist this morning and had a chance to put the bolts in