The lovely p2564 code

O

Owain@malonetuning

Associate Vendor , w/Business number
Joined
Jul 1, 2016
Location
Vancouver
TDI
PD jetta wagon
You can just tune it out as well and the motor will run fine, most people with upgraded turbos remove them. Keep in mind VCDS is accounting for atmospheric pressure as well.
 
Last edited:
BobnOH

BobnOH

not-a-mechanic
Joined
May 29, 2004
Location
central Ohio
TDI
New Beetle 2003 manual
O

Owain@malonetuning

Associate Vendor , w/Business number
Joined
Jul 1, 2016
Location
Vancouver
TDI
PD jetta wagon
Ahynes94 said:
You mean tune the actuator out?
Click to expand...
P2564 is for the vein position sensor, yes that can be tuned out while still using the actuator normally. If the actuator is also fault you'd probably throw other codes, it's common for the wiring to the vein position sensor to corrode/break as it sees a lot of heat cycles.
 
A

Ahynes94

Member
Joined
Aug 26, 2017
Location
Newfoundland Canada
TDI
2006 Jetta TDI
Owain@malonetuning said:
P2564 is for the vein position sensor, yes that can be tuned out while still using the actuator normally. If the actuator is also fault you'd probably throw other codes, it's common for the wiring to the vein position sensor to corrode/break as it sees a lot of heat cycles.
Click to expand...
Yeah the wires had be fixed before, and I re did them to clean them up a bit. I haven't tested the plug to see if it works though. Any idea how much it cost to get it tuned out?
 
You must log in or register to reply here.
Top