Bosch 4 bar MAP sensor - calibration?

Hi all,

I have a Bosch 4 bar MAP sensor from Darkside:

03K 906 051

What's the calibration I need on this please?

I can give it a good guess, but the 3bar is 3120mbar I believe, so is the 4 bar around the 4100mbar mark for ~4.8-5V?

Many thanks

I've seen this quoted:

0.215V 200mbar
3,803V 3408mbar

Ok to use?

I'm useing this:
400mV = 420 mbar
4646mV = 4100mbar

Could not find the factory values in the T5 BiT file right now.

0.215V(44 in decimal) 200mbar
4.461v (913 in decimal)4000mbar

Was what I have used in the past for people. Never had any complaints.

Many thanks gents!
This is now in and working (both cals very similar)