WVU TDI
Veteran Member
So my mom picked up a 2015 Passat TDI SEL from a dealership in North Carolina a few months ago. It's now at 80kish miles, and has developed a rather pronounced shudder when braking at highway speeds.
Considering the mileage and a lack of service records, we're going to go ahead and replace pads and rotors at all four corners, but I'm stuck trying to figure out if I'm getting the correct rear rotors or now. When I look at kits from my usual sites (ECS for example https://www.ecstuning.com/b-assembl...ke-service-kit-312x25-272x10/1k0615301aa4bkt/ ), they mention that the rear rotors are made for:
"**This brake service kit is designed for the 272x10 Bosch rear brakes. Please check your existing parts prior to ordering. Bosch rear braking components have the following identifiers.
Considering the mileage and a lack of service records, we're going to go ahead and replace pads and rotors at all four corners, but I'm stuck trying to figure out if I'm getting the correct rear rotors or now. When I look at kits from my usual sites (ECS for example https://www.ecstuning.com/b-assembl...ke-service-kit-312x25-272x10/1k0615301aa4bkt/ ), they mention that the rear rotors are made for:
"**This brake service kit is designed for the 272x10 Bosch rear brakes. Please check your existing parts prior to ordering. Bosch rear braking components have the following identifiers.
- 272x10 mm (10.7") rear rotor size.
- Banjo style rear brake line connections.
- Caliper has "Bosch" cast into the caliper body."
Last edited by a moderator: