Following on from my post about the engine nose I need to find a new crank and con rod for my BMM 2008 2.0 tdi PD 8V engine
The crank is 38AA and the rods are 038KJ
The crank has a small sprocket driving the oil pump and there is no balance shaft. And it's the type with less counter weights on.
I think I can fit a one from a different engine code as long as it's 38AA?
The crank is 38AA and the rods are 038KJ
The crank has a small sprocket driving the oil pump and there is no balance shaft. And it's the type with less counter weights on.
I think I can fit a one from a different engine code as long as it's 38AA?