PD130 Clutch Compatibilty with GTI 6R / S3

Hi all,

I sourced a clutch kit from a Golf 6R simply for educational purposes...
The spline count and diameter looks the same, pressure plate has a diff design ,but still fits well with the clutch hub, i dont have the flywheel too compare thou,

question at hand will a Audi S3 TFSi / Golf 6R Clutch kit fit onto a pd130 6speed engine and transmission?

why?
cause i have a CM FX500 available at a bargain price.
too me i everything looks like it will work,

but I want to confirm , maybe i'm missing something....

https://webcat.zf.com/index.asp?PKW...5&EINSPNR_ART=294&LASTPAGE=nc2_teile_info.asp

https://webcat.zf.com/index.asp?KAT...1&NKW=0&FZART=1&LASTPAGE=nc2_dialog_teile.asp

both of them have 23 teeth, 240mm diameter.. you can look at these links.. sachs gives the true info

Ive confirmed with those specs already

just the hub profile 21,8x24,2-23N vs 21,8x24,3-23N
theres a diff off ,1 on the boss...

eventually what ive found is that the offset of the boss is different,
which means a bigger recess is required on the flywheel...
which doesnt look like a prob as well...to me

apperently the spline width is 0,1 bigger in diameter on the TDI...
highly doubt it...