Mark buster
Member
Hi
I’ve recently converted my vw T3 from 1.6td to a AFN tdi.
I’ve got VCDS (Ross tech) and apart from not having the potentiometer and brake and clutch wires connected it will not start.
I had to remove the IP to adapt the block for the conversion
And timed it back up.
I’ve tried to vacuum fuel through to remove air in the fuel lines but still can see air between filter and pump.
When cranking I’m getting fuel through to injectors
White/dark grey smoke from exhaust
Good battery
New glow plugs
Good compression.
Also tried easy start
Any suggestions guys as Losing the will to live?
Thanks
Mark
I’ve recently converted my vw T3 from 1.6td to a AFN tdi.
I’ve got VCDS (Ross tech) and apart from not having the potentiometer and brake and clutch wires connected it will not start.
I had to remove the IP to adapt the block for the conversion
And timed it back up.
I’ve tried to vacuum fuel through to remove air in the fuel lines but still can see air between filter and pump.
When cranking I’m getting fuel through to injectors
White/dark grey smoke from exhaust
Good battery
New glow plugs
Good compression.
Also tried easy start
Any suggestions guys as Losing the will to live?
Thanks
Mark