different.eli
New member
where are these specs coming from?
the:
> Caliper to carrier (8mm allen; caliper->carrier pins): 28 Nm / 21ft-lbs
make much more sense than the 48ft-lbs i'm reading over here:
https://www.myturbodiesel.com/d2/1000q/a4/brake-pad-rotor-job.htm
don't want to over torque but don't want calipers to fall off...
thanks!
the:
> Caliper to carrier (8mm allen; caliper->carrier pins): 28 Nm / 21ft-lbs
make much more sense than the 48ft-lbs i'm reading over here:
https://www.myturbodiesel.com/d2/1000q/a4/brake-pad-rotor-job.htm
don't want to over torque but don't want calipers to fall off...
thanks!