Hello guys, I'm going to install a thermocouple before starting with the remap (1.9 TDI PD ex@105 with GTB2056VK Audi 70mm downpipe and stock injectors at the moment).
I would like to install the thermocouple in the egr inlet of the exhaust manifold, but I am afraid of destroying the turbo if for some reason the thermocouple should yield.
For this reason I would install it in the downpipe but I have heard that reading will not be accurate.
In your opinion, what is the best compromise between accurate reading and low risk of breakage?
Thanks to all of you, you are great.
I would like to install the thermocouple in the egr inlet of the exhaust manifold, but I am afraid of destroying the turbo if for some reason the thermocouple should yield.
For this reason I would install it in the downpipe but I have heard that reading will not be accurate.
In your opinion, what is the best compromise between accurate reading and low risk of breakage?
Thanks to all of you, you are great.