[VCDS] N/A displayed in mesure block (and so on TDI grap) but advanced mesure works !

Hello,

I have a golf 4 ALH.
I wanted to check my timing thanks to tdi graph but I can't get access to it since when I go in mesure block every blocks display N/A except the RPM however when I go in advanced mesure I can select and display any block !

What's the matter ?

Thanks

You have to go into "Basic Settings" Group 000. A "TDI Timing" button will appear in the lower right side of the window. Click on that and select the engine type from the list in the bottom right corner of the display. Engine should be at operating temperature.

Here's a video from the Ross-Tech wiki page:
https://www.youtube.com/watch?v=MEguZWbEE9g

Good Luck!

yep I already read it..
and of course I selected basic settings but the tdi timing button didn't appears !
my coolant was above 80 but below 85

any idea ?

Dd you click the "Go" button after selecting Group 000?

What version of VCDS are you running? Is it a genuine Ross-Tech copy or a pirated version?