Anybody have 6 guages

I want to put the following guages in my 2000 Jetta:
Boost, EGT, Oil Press, Fuel Press,Oil Temp,and ambient temp.

Nobody seems to make pillar mounts for more than two guages.

Some of you guys must have more than two or three guages in you cars. Care to share pics and or ideas??

Karl Ronick I htink that is how you spell his last name but he has got about 10 gauges in his bug. He evn won a roof rack at the 2000 tdi fest to mount more gauges to

as soon as I have the money I will be ordering a set of westach 2 in 1 gauges.

Each gauge has two needles. They will custom make the gauge for you.

I plan
oil temp/oil pressure
turbo boost/TIT
IAT/CHT

total cost with senders and gauges is going to be around $320. Going to mount them in the cubby between radio and cup holder.

http://karlroenick.com/VW/nb_gauge_project.htm here is his page.

"Going to mount them in the cubby between radio and cup holder."

osidak,

Please post a pic of your gauges once installed, as this is precisely the location where we would like to eventually install 2-3 gauges.

Thanks!

<blockquote><font size="1" face="Verdana, Helvetica, sans-serif">quote:</font><hr>Originally posted by Ride:
I want to put the following guages in my 2000 Jetta:
Boost, EGT, Oil Press, Fuel Press,Oil Temp,and ambient temp.

<hr></blockquote>


Fuel pressure??

Dorado,

Many people on the vortex have done this. Check out this URL for a 2 gauge install.

Cubbyhole gauge install at vwvortex

I've seen pics of a 3 gauge install. There's just enough room for it.

The blank panel is a VW part. You should be able to find the part number on the vortex.

I haven't done this (yet), but the only problem that I've read about is getting the panel to stay in the dash hole once the gauges are installed in it. Apparently if you install 3 gauges, you have to cut off some of the holding tabs on the panel.

Hope this helps,

-davin

It is I! The person formerly known as KR! Unfortunately my 'server' has been down for a while.