www.tdiclub.com

Economy - Longevity - Performance
The #1 Source of TDI Information on the Web!
Forums Articles Links Meets
Orders TDI Club Cards TDIFest 2016 Gone, but not forgotten VAG-Com List Unit Conversions TDIClub Chat Thank You

Order your TDIClub merchandise and help support TDIClub


Go Back   TDIClub Forums > VW TDI Discussion Areas > OBD Scanners

OBD Scanners Discussions on using On Board Diagnostic (OBD) scanners/ Diagnostic Equipment related to TDIs

Reply
 
Thread Tools
Old May 2nd, 2017, 14:03   #1
chriz1
Newbie
 
Join Date: Aug 2008
Location: Wales,United Kingdom
Default Scangauge xgauge code for dpf

Does anyone know the xgauge code for vw golf 2015 2.0 tdi it's uk car of this makes a difference?
chriz1 is offline   Reply With Quote
Old May 3rd, 2017, 03:20   #2
meerschm
Veteran Member
 
meerschm's Avatar
 
Join Date: Apr 2009
Location: Fairfax county VA
Default

https://www.scangauge.com/x-gauge-co.../generic-obd2/

start here with the exhaust temps and cat temps.

good luck.
__________________
Mike

Free advice: it is worth what you pay for it. (sometimes)
meerschm is offline   Reply With Quote
Old June 9th, 2017, 09:50   #3
Jetta_Pilot
Veteran Member
 
Jetta_Pilot's Avatar
 
Join Date: Apr 2005
Location: West Hill, Ont. Mexico mid October 2019 to end of April 2020
Default

Quote:
Originally Posted by chriz1 View Post
Does anyone know the xgauge code for vw golf 2015 2.0 tdi it's uk car of this makes a difference?
Try this thread here on TDI club:

http://forums.tdiclub.com/showthread.php?t=360498
__________________
All LED interior bulbs. Several VCDS mods. Darker window tint. EVO skid-plate. Malone Stage 2, Malone DSG tune. Winpower Projector headlights. Angel eyes. LED DRL's. 24mm H&R rear sway bar. Phase 1 & Phase 2 done.Scangauge II
Jetta_Pilot is offline   Reply With Quote
Old June 10th, 2017, 20:22   #4
Diesl
Veteran Member
 
Join Date: Dec 2012
Location: Chicago
Default Never tried mode 6 with scangauge

It's a long time since I have used my scangauge. I have posted the mode 6 location for DPF soot load, and Iain implemented displaying mode 6 data as gauges for his 'Torque' Android application, but I never backported it to the scangauge. See
http://forums.tdiclub.com/showthread.php?t=464119

I could be wrong, but if I remember correctly, the TXD command takes the particular ECU the command is addressed to in the first two bytes, then comes the mode, and then the PID?
The DPF soot load is quite deep in the data record, so I'm not even sure the scangauge can parse that many bytes.
__________________
If it works, take it apart and find out why!

Last edited by Diesl; June 10th, 2017 at 20:37.
Diesl is offline   Reply With Quote
Old June 11th, 2017, 11:59   #5
Jetta_Pilot
Veteran Member
 
Jetta_Pilot's Avatar
 
Join Date: Apr 2005
Location: West Hill, Ont. Mexico mid October 2019 to end of April 2020
Default

I have set up a DPF gauge on my Scangauge, but so far it is just blank.
Should there be a temperature or other display, or will that only happen if/when the engine goes into the Regen mode ?
__________________
All LED interior bulbs. Several VCDS mods. Darker window tint. EVO skid-plate. Malone Stage 2, Malone DSG tune. Winpower Projector headlights. Angel eyes. LED DRL's. 24mm H&R rear sway bar. Phase 1 & Phase 2 done.Scangauge II
Jetta_Pilot is offline   Reply With Quote
Old June 11th, 2017, 17:46   #6
Diesl
Veteran Member
 
Join Date: Dec 2012
Location: Chicago
Default

Hi Jetta_Pilot, how did you set it up, and what car are you trying to read?

I really don't know whether the scangauge can read mode 6 data, but it would be interesting to find out.
__________________
If it works, take it apart and find out why!
Diesl is offline   Reply With Quote
Old June 12th, 2017, 12:15   #7
Jetta_Pilot
Veteran Member
 
Jetta_Pilot's Avatar
 
Join Date: Apr 2005
Location: West Hill, Ont. Mexico mid October 2019 to end of April 2020
Default

Quote:
Originally Posted by Diesl View Post
Hi Jetta_Pilot, how did you set it up, and what car are you trying to read?
2015 Passat
__________________
All LED interior bulbs. Several VCDS mods. Darker window tint. EVO skid-plate. Malone Stage 2, Malone DSG tune. Winpower Projector headlights. Angel eyes. LED DRL's. 24mm H&R rear sway bar. Phase 1 & Phase 2 done.Scangauge II
Jetta_Pilot is offline   Reply With Quote
Old June 12th, 2017, 22:14   #8
Diesl
Veteran Member
 
Join Date: Dec 2012
Location: Chicago
Default

I know, I know, never put more than one question into an email or post... ;-)
So, how did you set it up?
__________________
If it works, take it apart and find out why!
Diesl is offline   Reply With Quote
Old June 13th, 2017, 06:41   #9
Jetta_Pilot
Veteran Member
 
Jetta_Pilot's Avatar
 
Join Date: Apr 2005
Location: West Hill, Ont. Mexico mid October 2019 to end of April 2020
Default

This is what I used for the DPF gauge. I just realized this was for older VW's ?

CAT B1S1: This is useful for monitoring regeneration activity. Anything over 900F is a regen.
TXD: 07DF013C
RXF: 0441053C0000
RXD: 2810
MTH: 00090032FFD8
NAM: DPF



From TDI page

http://forums.tdiclub.com/showthread.php?t=360498
__________________
All LED interior bulbs. Several VCDS mods. Darker window tint. EVO skid-plate. Malone Stage 2, Malone DSG tune. Winpower Projector headlights. Angel eyes. LED DRL's. 24mm H&R rear sway bar. Phase 1 & Phase 2 done.Scangauge II
Jetta_Pilot is offline   Reply With Quote
Old June 13th, 2017, 18:46   #10
Diesl
Veteran Member
 
Join Date: Dec 2012
Location: Chicago
Default

Oh, I completely misunderstood what you meant by DPF gauge. You want one of the exhaust temperatures, which should show the temperature all the time, and will indeed tell whether the DPF is currently being regenerated. All four (or five?) of the EGT monitors should work on a 2015 Passat, including the one you listed. The values for TXD etc. agree with what works on my 2012 Sportwagon.
__________________
If it works, take it apart and find out why!
Diesl is offline   Reply With Quote
Old June 27th, 2017, 06:49   #11
Jetta_Pilot
Veteran Member
 
Jetta_Pilot's Avatar
 
Join Date: Apr 2005
Location: West Hill, Ont. Mexico mid October 2019 to end of April 2020
Default

For example to set up the BOOST X-Gauge I followed the destruction's I found somewhere. But I also learned that the RXD may be 3810 or even 4810 instead of 2810. Additionally you need to play with the last 2 digits in the MTH setting. I found that the last 2 digits at 64 come pretty close to reading zero at engine off.
__________________
All LED interior bulbs. Several VCDS mods. Darker window tint. EVO skid-plate. Malone Stage 2, Malone DSG tune. Winpower Projector headlights. Angel eyes. LED DRL's. 24mm H&R rear sway bar. Phase 1 & Phase 2 done.Scangauge II
Jetta_Pilot is offline   Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
FS ScanGauge II w/ XGauge. $130 shipped. compu_85 Private TDI Items for Sale/Wanted 3 June 7th, 2016 18:00
Scangauge Xgauge Problem Bengoshi2000 OBD Scanners 5 February 10th, 2014 06:25
Known working Scangauge II xgauge codes for 2009 / 2010? mysql VW MKVI-A6 Golf family including Jetta SportWagen (~ 2010-2014) 12 April 19th, 2013 18:48
Scangauge XGauge function programming yaknowthatguy OBD Scanners 27 February 15th, 2010 13:54
Scangauge/Xgauge showing TFT (DSG temp) HeAvYfUeL OBD Scanners 7 August 9th, 2009 19:21


All times are GMT -7. The time now is 10:15.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2020, Jelsoft Enterprises Ltd.
Copyright - TDIClub Online LTD - 2017
Contact Us | Privacy Statement | Forum Rules | Disclaimer
TDIClub Online Ltd (TDIClub.com) is not affiliated with the VWoA or VWAG and is supported by contributions from viewers like you.
1996 - 2020, All Rights Reserved
Page generated in 0.19556 seconds with 13 queries
[Output: 106.80 Kb. compressed to 90.48 Kb. by saving 16.32 Kb. (15.28%)]