www.tdiclub.com

Economy - Longevity - Performance
The #1 Source of TDI Information on the Web!
Forums Articles Links Meets
Orders TDI Club Cards TDIFest 2016 Gone, but not forgotten VAG-Com List Unit Conversions TDIClub Chat Thank You

Order your TDIClub merchandise and help support TDIClub


Go Back   TDIClub Forums > TDI Model Specific Discussions Areas > VW MKIII-A3/B4 TDIs

VW MKIII-A3/B4 TDIs This is a discussion about MKIII-A3/MkIII Jetta/Golf (<99.5) and B4 Passats (96,97) TDI's. Non TDI related postings will be moved or removed.

Reply
 
Thread Tools
Old August 13th, 2019, 12:30   #1
Dan99TDI
Member
 
Join Date: Dec 2013
Location: Nevada City, CA
Default Oil pressure issue

Hey tdi'ers
My new-to-me 98 jetta tdi flashed the oil light at me this morning. I pulled off and checked it, and it had the correct amount of oil, which I just put in 1500 miles ago or so, full syn 5w-40 Castrol which was supposed to meet 505.00

I restarted it and had no light, so I gingerly got back going and it seemed to be going fine, until I had to slow down a little, and at 2100 rpm, the light started flashing again, but I was accelerating and by the time I hit 2200 it went away.

After this, I watched closely for it and it didn't show up again for the rest of the 20 highway miles, but as I took the exit for work it beeped twice as I decelerated through 2000 rpm. As soon as I down shifted it went away.

I just had to replace the oil pressure sender on the filter housing because it had cracked and leaked oil.

I'm wondering if this is a known artifact, considering it is a very narrow rpm range? Or perhaps the first sign of a failing pump?

If it makes a difference, it's almost 100f out here.

Edit : 230k miles

Last edited by Dan99TDI; August 13th, 2019 at 12:37.
Dan99TDI is offline   Reply With Quote
Old August 13th, 2019, 12:36   #2
Phi1osopher
Member
 
Phi1osopher's Avatar
 
Join Date: Jul 2019
Location: Austin, TX
Default

I don't know if it is a known issue or not, but it should be reasonably easy to connect an oil pressure diagnostic tool to monitor actual pressure.

I have this one from Harbor Freight, and it seems to work well for me, though I've not yet had to use it on a VW.

https://www.harborfreight.com/Engine...Kit-62621.html
Phi1osopher is offline   Reply With Quote
Old August 13th, 2019, 17:40   #3
Mongler98
Veteran Member
 
Join Date: Mar 2011
Location: Northern MD
Fuel Economy: Race: 12mpg, Gandma:65mpg
Default

this has happened to me MANY TIMES, an air bubble or something gets in front of the transducer or its bad right off the shelf. #1 thing you should do before even driving it or spending any more $ is putting a oil psi gauge on it. you can easily plumb one on to the oil feed line to the turbo with a braided line to replace the hard line or where the transducer is now. either way, you want to verify that the oil is pumping around at a good psi. after that, you can mess with stuff and rest assured that no damage was done.
it should not matter even if its 120F outside, the oil is doing its job and cars would not last long if oil didnt work well on a 100*day
Mongler98 is offline   Reply With Quote
Old Yesterday, 13:49   #4
Dan99TDI
Member
 
Join Date: Dec 2013
Location: Nevada City, CA
Default

finally got a gauge on it.

hot:
idle was ~20psi
2000 rpm was around 40 psi
4000 rpm was around 60 psi.

seems like reasonable oil pressure.

I read how the sensor is just a ground path, and thought about how there was a bunch of oil on the connector from the sensor failure. so I brakleened it a bunch and it helped, but I still get the light and buzzer from time to time.

Mongler, how do you get rid of an air bubble? crack it while running for just a second?

I'm thinking of wiring the sensor wire directly to ground, and installing an oil pressure gauge... something this important shouldn't just be a light.
Dan99TDI is offline   Reply With Quote
Old Yesterday, 14:53   #5
KLXD
Veteran Member
 
Join Date: Aug 2009
Location: Lompoc, CA
Default

Sounds like you've an electrical problem.

A little air is just going to give you some damping. The light will stay on a fraction of a second longer at start and take a similar amount of extra time to go off when pressure drops. It won't cause a running engine to have momentary low readings.
__________________
Saying no to gas for 25 years:

Current: 02 Jetta, Auto; 98 Jetta, 5 Spd; 98 Dodge, 5 Spd, SB, 4x4; 84 Grand Wagoneer with Nissan SD33T, NV4500, Dana 300, Reverse Cut Dana 44, Dana 60

The Black Sheep (Only gasser): 85 CJ, 4.2 w/4.0 Head and Mopar FI.

Past: 85 Mitsubishi PU, 4D55T; 81 Rabbit, 1.6; 80 Dasher, 1.5; 79 Rabbit, 1.5
KLXD is offline   Reply With Quote
Old Yesterday, 18:52   #6
Vince Waldon
Veteran Member
 
Vince Waldon's Avatar
 
Join Date: Apr 2009
Location: Edmonton Alberta Canada
Default

http://vincewaldon.com/index.php?opt...d=40&Itemid=28
__________________
Vince Waldon Edmonton AB Canada

Note: The above is to the best of my knowledge- but at the end of the day simply interweb opinion, worth EXACTLY what you paid for it, and if used done so at your own risk.
Vince Waldon is offline   Reply With Quote
Old Yesterday, 19:58   #7
Abacus
That helpful B4 guy
 
Abacus's Avatar
 
Join Date: Nov 2007
Location: Nobleboro, Maine
Fuel Economy: And the miles just keep ticking away
Default

I’ve had that happen before and it was due to a bad sensor.

It leaked oil through it when removed and tipped towards the ground.

__________________
'97 B4: 453,000 miles Malone 3, PP520's, Stage 2 cam, SBC3, ARP studs, 2 1/4" exhaust, 2.5" Cat, no mufflers or EGR.
'96 B4V: 356,000 miles Malone 2+, PP520's, 6 speed, 02J short shifter, E-Codes, G60 brakes, Evo plate, DMF, stainless exhaust, heated leathers, cold weather package
BUG*PWR 2013 Award Winner
Abacus is offline   Reply With Quote
Old Yesterday, 20:11   #8
Vince Waldon
Veteran Member
 
Vince Waldon's Avatar
 
Join Date: Apr 2009
Location: Edmonton Alberta Canada
Default

Yup, given that the gauge reading proves the actual pressure is good (thank heavens) it's gonna be a sensor issue, or the wiring to the sensor.

Trick is, there's two... one's normally open and the other's normally closed, and they work at different pressures. Link above.
__________________
Vince Waldon Edmonton AB Canada

Note: The above is to the best of my knowledge- but at the end of the day simply interweb opinion, worth EXACTLY what you paid for it, and if used done so at your own risk.
Vince Waldon is offline   Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
serious oil pressure issue after rebuild ken.fresno-tdi VW MKIII-A3/B4 TDIs 2 July 27th, 2018 07:24
05 Passat Wagon GLS TDI oil pressure issue? Coulour King VW B5 Passat TDIs 3 October 30th, 2017 15:34
Oil pressure light issue csstevej VW MKIV-A4 TDIs (VE and PD) 6 September 20th, 2016 17:45
Oil Pressure gauge wiring issue. mhintlian VW MKIV-A4 TDIs (VE and PD) 20 June 20th, 2015 22:39
Oil pressure issue.... Help! Maverick4eva VW MKIII-A3/B4 TDIs 4 June 22nd, 2011 14:15


All times are GMT -7. The time now is 01:51.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.
Copyright - TDIClub Online LTD - 2017
Contact Us | Privacy Statement | Forum Rules | Disclaimer
TDIClub Online Ltd (TDIClub.com) is not affiliated with the VWoA or VWAG and is supported by contributions from viewers like you.
1996 - 2017, All Rights Reserved
Page generated in 0.13155 seconds with 13 queries
[Output: 87.40 Kb. compressed to 75.44 Kb. by saving 11.96 Kb. (13.69%)]